Skip to end of metadata
Go to start of metadata



Pitch shift both tx and rx audio streams on a channel.



exten => 1,1,Set(PITCH_SHIFT(tx)=highest); raises pitch an octave

exten => 1,1,Set(PITCH_SHIFT(rx)=higher) ; raises pitch more

exten => 1,1,Set(PITCH_SHIFT(both)=high) ; raises pitch

exten => 1,1,Set(PITCH_SHIFT(rx)=low) ; lowers pitch

exten => 1,1,Set(PITCH_SHIFT(tx)=lower) ; lowers pitch more

exten => 1,1,Set(PITCH_SHIFT(both)=lowest) ; lowers pitch an octave

exten => 1,1,Set(PITCH_SHIFT(rx)=0.8) ; lowers pitch

exten => 1,1,Set(PITCH_SHIFT(tx)=1.5) ; raises pitch


PITCH_SHIFT(channel direction)
  • channel direction - Direction can be either rx, tx, or both. The direction can either be set to a valid floating point number between 0.1 and 4.0 or one of the enum values listed below. A value of 1.0 has no effect. Greater than 1 raises the pitch. Lower than 1 lowers the pitch.
    The pitch amount can also be set by the following values
    • highest
    • higher
    • high
    • low
    • lower
    • lowest

See Also

Import Version

This documentation was imported from Asterisk Version GIT-11-3e0eafa

  • No labels