Skip to content

JITTERBUFFER()

Synopsis

Add a Jitterbuffer to the Read side of the channel. This dejitters the audio stream before it reaches the Asterisk core. This is a write only function.

Description

Jitterbuffers are constructed in two different ways. The first always take four arguments: max_size, resync_threshold, target_extra, and sync_video. Alternatively, a single argument of 'default' can be provided, which will construct the default jitterbuffer for the given jitterbuffer type.

The arguments are:

max_size: Length in milliseconds of the buffer. Defaults to 200 ms.

resync_threshold: The length in milliseconds over which a timestamp difference will result in resyncing the jitterbuffer. Defaults to 1000ms.

target_extra: This option only affects the adaptive jitterbuffer. It represents the amount time in milliseconds by which the new jitter buffer will pad its size. Defaults to 40ms.

sync_video: This option enables video synchronization with the audio stream. It can be turned on and off. Defaults to off.

Example: Fixed with defaults
exten => 1,1,Set(JITTERBUFFER(fixed)=default)
Example: Fixed with 200ms max size
exten => 1,1,Set(JITTERBUFFER(fixed)=200)
Example: Fixed with 200ms max size and video sync support
exten => 1,1,Set(JITTERBUFFER(fixed)=200,,,yes)
Example: Fixed with 200ms max size, resync threshold 1500
exten => 1,1,Set(JITTERBUFFER(fixed)=200,1500)
Example: Adaptive with defaults
exten => 1,1,Set(JITTERBUFFER(adaptive)=default)
Example: Adaptive with 200ms max size, 60ms target extra
exten => 1,1,Set(JITTERBUFFER(adaptive)=200,,60)
Example: Adaptive with 200ms max size and video sync support
exten => 1,1,Set(JITTERBUFFER(adaptive)=200,,,yes)
Example: Set a fixed jitterbuffer with defaults; then remove it
exten => 1,1,Set(JITTERBUFFER(fixed)=default)
exten => 1,n,Set(JITTERBUFFER(disabled)=)

Note

If a channel specifies a jitterbuffer due to channel driver configuration and the JITTERBUFFER function has set a jitterbuffer for that channel, the jitterbuffer set by the JITTERBUFFER function will take priority and the jitterbuffer set by the channel configuration will not be applied.

Syntax

JITTERBUFFER(jitterbuffer type)
Arguments

  • jitterbuffer type

    • fixed - Set a fixed jitterbuffer on the channel.

    • adaptive - Set an adaptive jitterbuffer on the channel.

    • disabled - Remove a previously set jitterbuffer from the channel.

Generated Version

This documentation was generated from Asterisk branch 20 using version GIT