AudioSocket is a simple TCP-based protocol for sending and receiving real-time audio streams.
There exists a protocol definition (below), a Go library, and Asterisk application and channel interfaces.
The singular design goal of AudioSocket is to present the simplest possible audio streaming protocol, initially based on the constraints of Asterisk audio. Each packet contains a three-byte header and a variable payload. The header is composed of a one-byte type and a two-byte length indicator.
The minimum message length is three bytes: type and payload-length. Hangup indication, for instance, is
0x00 0x00 0x00.
0x00- Terminate the connection (socket closure is also sufficient)
0x01- Payload will contain the UUID (16-byte binary representation) for the audio stream
0x10- Payload is signed linear, 16-bit, 8kHz, mono PCM (little-endian)
0xff- An error has occurred; payload is the (optional) application-specific error code. Asterisk-generated error codes are listed below.
The payload length is a 16-bit unsigned integer (big endian) indicating how many bytes are in the payload.
The content of the payload is defined by the header: type and length.