What is needed
- FreeRADIUS server
- Radiusclient-ng library
- Asterisk PBX
Installation of the Radiusclient library
Download the sources
Untar the source tarball:
Compile and install the library:
Configuration of the Radiusclient library
By default all the configuration files of the radiusclient library will be in /usr/local/etc/radiusclient-ng directory.
File "radiusclient.conf" Open the file and find lines containing the following:
This is the hostname or IP address of the RADIUS server used for authentication. You will have to change this unless the server is running on the same host as your Asterisk PBX.
This is the hostname or IP address of the RADIUS server used for accounting. You will have to change this unless the server is running on the same host as your Asterisk PBX.
RADIUS protocol uses simple access control mechanism based on shared secrets that allows RADIUS servers to limit access from RADIUS clients.
A RADIUS server is configured with a secret string and only RADIUS clients that have the same secret will be accepted.
You need to configure a shared secret for each server you have configured in radiusclient.conf file in the previous step. The shared secrets are stored in /usr/local/etc/radiusclient-ng/servers file.
Each line contains hostname of a RADIUS server and shared secret used in communication with that server. The two values are separated by white spaces. Configure shared secrets for every RADIUS server you are going to use.
Asterisk uses some attributes that are not included in the dictionary of radiusclient library, therefore it is necessary to add them. A file called dictionary.digium (kept in the contrib dir) was created to list all new attributes used by Asterisk. Add to the end of the main dictionary
file /usr/local/etc/radiusclient-ng/dictionary the line:
Install FreeRADIUS Server (Version 1.1.1)
Download sources tarball from:
Untar, configure, build, and install the server:
All the configuration files of FreeRADIUS server will be in /usr/local/etc/raddb directory.
Configuration of the FreeRADIUS Server
There are several files that have to be modified to configure the RADIUS server. These are presented next.
File /usr/local/etc/raddb/clients.conf contains description of RADIUS clients that are allowed to use the server. For each of the clients you need to specify its hostname or IP address and also a shared secret. The shared secret must be the same string you configured in radiusclient library.
This fragment allows access from RADIUS clients on "myhost" if they use "mysecret" as the shared secret. The file already contains an entry for localhost (127.0.0.1), so if you are running the RADIUS server on the same host as your Asterisk server, then modify the existing entry instead, replacing the default password.
The following procedure brings the dictionary.digium file to previous versions of FreeRADIUS.
File /usr/local/etc/raddb/dictionary contains the dictionary of FreeRADIUS server. You have to add the same dictionary file (dictionary.digium), which you added to the dictionary of radiusclient-ng library. You can include it into the main file, adding the following line at the end of file /usr/local/etc/raddb/dictionary:
That will include the same new attribute definitions that are used in radiusclient-ng library so the client and server will understand each other.
Asterisk Accounting Configuration
Compilation and installation:
The module will be compiled as long as the radiusclient-ng library has been detected on your system.
By default FreeRADIUS server will log all accounting requests into /usr/local/var/log/radius/radacct directory in form of plain text files. The server will create one file for each hostname in the directory. The following example shows how the log files look like.
Asterisk now generates Call Detail Records. See /include/asterisk/cdr.h for all the fields which are recorded. By default, records in comma separated values will be created in /var/log/asterisk/cdr-csv.
The configuration file for cdr_radius.so module is /etc/asterisk/cdr.conf
This is where you can set CDR related parameters as well as the path to the radiusclient-ng library configuration file.
- "Asterisk-Acc-Code", The account name of detail records
- "Asterisk-Dst-Ctx", The destination context
- "Asterisk-Chan", The channel
- "Asterisk-Dst-Chan", (if applicable)
- "Asterisk-Last-App", Last application run on the channel
- "Asterisk-Last-Data", Argument to the last channel
- "Asterisk-Duration", Duration is the whole length that the entire call lasted. ie. call rx'd to hangup "end time" minus "start time"
- "Asterisk-Bill-Sec", The duration that a call was up after other end answered which will be <= to duration "end time" minus "answer time"
- "Asterisk-Disposition", ANSWERED, NO ANSWER, BUSY
- "Asterisk-AMA-Flags", DOCUMENTATION, BILL, IGNORE etc, specified on a per channel basis like accountcode.
- "Asterisk-Unique-ID", Unique call identifier
- "Asterisk-User-Field" User field set via SetCDRUserField