t1_e1_interfaces.save
Versioning Notes
This object and method were part of t1_e1_settings.save until version 1.1. For versions lower than this, combine the request parameters for these two requests into one and use the t1_e1_settings.save method.
Description
Save T1/E1 port configuration for one or more ports.
Arguments
name | required | value type | default |
|---|---|---|---|
name | yes | string | port1, port2, et. Al |
line_type | no | t1, e1 | t1 |
description | no | string |
|
framing | no | D4, ESF, CCS | ESF |
coding | no | B8ZS, AMI, HDB3 | B8ZS |
lbo | no | 0-7 | 0 |
crc4 | no | 0/1 | 0 |
echocancel | no | 0/1 | 1 |
rxgain | no | number with up to 1 decimal | 0 |
txgain | no | number with up to 1 decimal | 0 |
signaling | no | PRI, EM, EM_W, FEATD, FEATDMF, FEATB, FXS_LS, FXS_KS, FXS_GS, FXO_LS, FXO_KS, FXO_GS, MIXED | PRI |
signaling_role | no | net, cpe | cpe |
pri_switchtype | no | NATIONAL, NI1, DMS100, 4ESS, 5ESS, QSIG | national |
qsigchannelmapping | no | LOGICAL, PHYSICAL | PHYSICAL |
pri_dialplan | no | UNKNOWN, INTERNATIONAL, LOCAL, NATIONAL, DYNAMIC, PRIVATE | NATIONAL |
pri_nsf | no | NONE, SDN, MEGACOM, TOLLFREEMEGACOM, ACCUNET | NONE |
idle_bearer_reset | no | 0/1 | 1 |
pri_resetinterval | no | number | 3600 |
pri_overlapdial | no | NO, INCOMING, OUTGOING, BOTH | NO |
pri_inbanddisconnect | no | 0/1 | 0 |
pri_indication | no | 0/1 | 1 |
pri_facilityenable | no | 0/1 | 0 |
pri_exclusive | no | 0/1 | 0 |
pri_huntstrategy | no | ascending, descending | descending |
pri_discardremoteholdretrieval | no | 0/1 | 1 |
hidecalleridname | no | 0/1 | 0 |
layer_2_out_unack_iframes | no | number | 7 |
layer_2_num_frame_retransmit | no | number | 3 |
layer_2_frame_retransmit_time | no | number | 1000 |
layer_2_time_wo_frame_exch | no | number | 10000 |
disconnect_ack | no | number | 30000 |
release_ack | no | number | 4000 |
enable_maintain_calls_on_disconnect | no | 0/1 | 0 |
maintain_calls_on_disconnect | no | number |
|
connect_ack | no | number | 3000 |
busydetect | no | 0/1 | 1 |
busycount | no | number | 3 |
busypattern | no | two numbers, comma delimited | 500,500 |
answeronpolarityswitch | no | 0/1 | 1 |
hanguponpolarityswitch | no | 0/1 | 1 |
polarityonanswerdelay | no | number | 600 |
prewink | no | number | 50 |
wink | no | number | 50 |
start | no | number | 1500 |
rxwink | no | number | 300 |
debounce | no | number | 600 |
toneduration | no | number | 100 |
ringtimeout | no | number | 8000 |
usecallerid | no | 0/1 | 1 |
cidsignaling | no | bell, v23, v23_jp, dtmf | bell |
cidstart | no | ring, polarity | ring |
waitfordialtone | no | 0/1 | 0 |
Example Requests & Responses
Example One
Request
Save T1/E1 port configuration for one or more ports.
Response
Or