Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: grammar changes
Wiki Markup
{numberedheadings}

{toc}

Now that we have libpri installed, let's install DAHDI. On Linux, we will use the DAHDI-linux-complete tarball, which contains both the DAHDI Linux drivers as well as the DAHDI tools. Again, we're assuming that you've untarred the tarball in the /usr/local/src directory, and that you'll replace X and Y with the appropriate version numbers.

h2. With Internet Access
{noformat}
[[email protected] src]# cd dahdi-linux-complete-2.X.Y+2.X.Y

[[email protected] dahdi-linux-complete-2.X.Y+2.X.Y]# make

[[email protected] dahdi-linux-complete-2.X.Y+2.X.Y]# make install

[[email protected] dahdi-linux-complete-2.X.Y+2.X.Y]# make config
{noformat}

h2. Without Internet Access
When installing on a system without internet access, there are a few additional steps that are required to build DAHDI.
The firmware files for the various VPM modules will need to be downloaded and extracted in the source directory. The file specific links provided below are the current versions as of this writing,. pleasePlease check the link below for the full list of versions.

http://downloads.digium.com/pub/telephony/firmware/releases/

On a system with internet access, download the following files:
{noformat}
wget http://downloads.digium.com/pub/telephony/firmware/releases/dahdi-fw-hx8-2.06.tar.gz

wget http://downloads.digium.com/pub/telephony/firmware/releases/dahdi-fw-oct6114-064-1.05.01.tar.gz

wget http://downloads.digium.com/pub/telephony/firmware/releases/dahdi-fw-oct6114-128-1.05.01.tar.gz

wget http://downloads.digium.com/pub/telephony/firmware/releases/dahdi-fw-vpmoct032-1.8.0.tar.gz

wget http://downloads.digium.com/pub/telephony/firmware/releases/dahdi-fw-tc400m-MR6.12.tar.gz

wget http://downloads.digium.com/pub/telephony/firmware/releases/dahdi-fwload-vpmadt032-1.25.0.tar.gz
{noformat}

Now send these to the Asterisk system and store them in {noformat}/usr/local/src/dahdi-linux-complete-2.X.Y+2.X.Y/linux/drivers/dahdi/firmware/ {noformat}

Now we can continue the installation on the Asterisk system using the steps below.

{noformat}
[[email protected] src]# cd dahdi-linux-complete-2.X.Y+2.X.Y

[[email protected] dahdi-linux-complete-2.X.Y+2.X.Y]# cd linux/drivers/dahdi/firmware

[[email protected] firmware]# for tarball in $(ls dahdi-fw-*.tar.gz); do tar -zxf $tarball; done;

[[email protected] firmware]# cd -

[[email protected] dahdi-linux-complete-2.X.Y+2.X.Y]# make

[[email protected] dahdi-linux-complete-2.X.Y+2.X.Y]# make install

[[email protected] dahdi-linux-complete-2.X.Y+2.X.Y]# make config
{noformat}

{numberedheadings}