Apply automatic gain control to audio on a channel.
The AGC function will apply automatic gain control to the audio on the channel that it is executed on. Using
rx for audio received and
tx for audio transmitted to the channel. When using this function you set a target audio level. It is primarily intended for use with analog lines, but could be useful for other channels as well. The target volume is set with a number between
1-32768. The larger the number the louder (more gain) the channel will receive.
exten => 1,1,Set(AGC(rx)=8000)
exten => 1,2,Set(AGC(tx)=off)
channeldirection- This can be either
This documentation was imported from Asterisk Version SVN-branch-11-r379343