Page History

...

In the Admin section select "FreePBX Framework" then "Download and Upgrade"

Click on "Process"

Then click "confirm"

Image Added

You will see the progress appear (with out styles) 

Then 

Image Added

When the process is complete - reload the page you will be presented with this start screen. Click on "FreePBX Administration"

Image Added

Then log in using your Elastix Admin credentials

Image Added

Step 7 - Install the Digium Phone Config Module

From the FreePBX GUI go to Admin > Module Admin

Image Added

Select the basic repository and click on "Check Online"

Image Added

Scroll down to the Connectivity section, click on "Digium Phone Config" then select "Download and Install"

Image Added

At the top, click on "Process"

Image Added

then "Confirm" 

Image Added

You will see the progress on the screen. When it is finished click the "x" to close the overlay. 

Image Added

Important! You must move the sample res_digium_phones.conf file as it will not be over written. 

Log in to the Linux shell of your Elastix server and issue the command 

sudo mv /etc/asterisk/res_digium_phone.conf /etc/asterisk/res_digium_phone.conf.sample

After you have moved the sample file, click on "Apply Config"

Image Added

You may now administer your Digium Phones using the Unembedded FreePBX GUI. Go to Connectivity > Digium Phones

Image Added

Visit the Digium Phone Config module for FreePBX page for full instructions on using this module. 

You may configure standard PBX elements such as extensions and queues from your Elastix GUI and they will work with your Digium Phones.