Name of endpoint identified
IP addresses or networks to match against.
Perform SRV lookups for provided hostnames.
Header/value pair to match against.
Must be of type 'identify'.
The value is a comma-delimited list of IP addresses or hostnames.
IP addresses may have a subnet mask appended. The subnet mask may be written in either CIDR or dotted-decimal notation. Separate the IP address and subnet mask with a slash ('/'). A source port can also be specified by adding a colon (':') after the address but before the subnet mask, e.g. 188.8.131.52:5061/24. To specify a source port for an IPv6 address, the address itself must be enclosed in square brackets ('[2001:db8:0::1]:5060')
When a hostname is used, the behavior depends on whether srv_lookups is enabled and/or a source port is provided. If srv_lookups is enabled and a source port is not provided, Asterisk will perform an SRV lookup on the provided hostname, adding all of the A and AAAA records that are resolved.
If the SRV lookup fails, srv_lookups is disabled, or a source port is specified when the hostname is configured, Asterisk will resolve the hostname and add all A and AAAA records that are resolved.
This documentation was imported from Asterisk Version GIT-13-13.15.0-rc1-25562566-gfa700acg9b22061