ObjectType- The object's type. This will always be 'endpoint'.
ObjectName- The name of this object.
Context- Dialplan context for inbound sessions
Disallow- Media Codec(s) to disallow
Allow- Media Codec(s) to allow
DtmfMode- DTMF mode
RtpIpv6- Allow use of IPv6 for RTP traffic
RtpSymmetric- Enforce that RTP must be symmetric
IceSupport- Enable the ICE mechanism to help traverse NAT
UsePtime- Use Endpoint's requested packetisation interval
ForceRport- Force use of return port
RewriteContact- Allow Contact header to be rewritten with the source IP address-port
Transport- Desired transport configuration
OutboundProxy- Proxy through which to send requests, a full SIP URI must be provided
MohSuggest- Default Music On Hold class
100rel- Allow support for RFC3262 provisional ACK tags
Timers- Session timers for SIP packets
TimersMinSe- Minimum session timers expiration period
TimersSessExpires- Maximum session timer expiration period
Auth- Authentication Object(s) associated with the endpoint
OutboundAuth- Authentication object used for outbound requests
Aors- AoR(s) to be used with the endpoint
MediaAddress- IP address used in SDP for media handling
IdentifyBy- Way(s) for Endpoint to be identified
DirectMedia- Determines whether media may flow directly between endpoints.
DirectMediaMethod- Direct Media method type
ConnectedLineMethod- Connected line method type
DirectMediaGlareMitigation- Mitigation of direct media (re)INVITE glare
DisableDirectMediaOnNat- Disable direct media session refreshes when NAT obstructs the media session
Callerid- CallerID information for the endpoint
CalleridPrivacy- Default privacy level
CalleridTag- Internal id
_tag for the endpoint
TrustIdInbound- Accept identification information received from this endpoint
TrustIdOutbound- Send private identification details to the endpoint.
SendPai- Send the P-Asserted-Identity header
SendRpid- Send the Remote-Party-ID header
SendDiversion- Send the Diversion header, conveying the diversion information to the called user agent
Mailboxes- NOTIFY the endpoint when state changes for any of the specified mailboxes
AggregateMwi- Condense MWI notifications into a single NOTIFY.
MediaEncryption- Determines whether res
_pjsip will use and enforce usage of media encryption for this endpoint.
MediaEncryptionOptimistic- Determines whether encryption should be used if possible but does not terminate the session if not achieved.
UseAvpf- Determines whether res
_pjsip will use and enforce usage of AVPF for this endpoint.
ForceAvp- Determines whether res
_pjsip will use and enforce usage of AVP, regardless of the RTP profile in use for this endpoint.
MediaUseReceivedTransport- Determines whether res
_pjsip will use the media transport received in the offer SDP in the corresponding answer SDP.
OneTouchRecording- Determines whether one-touch recording is allowed for this endpoint.
InbandProgress- Determines whether chan
_pjsip will indicate ringing using inband progress.
CallGroup- The numeric pickup groups for a channel.
PickupGroup- The numeric pickup groups that a channel can pickup.
NamedCallGroup- The named pickup groups for a channel.
NamedPickupGroup- The named pickup groups that a channel can pickup.
DeviceStateBusyAt- The number of in-use channels which will cause busy to be returned as device state
T38Udptl- Whether T.38 UDPTL support is enabled or not
T38UdptlEc- T.38 UDPTL error correction method
T38UdptlMaxdatagram- T.38 UDPTL maximum datagram size
FaxDetect- Whether CNG tone detection is enabled
T38UdptlNat- Whether NAT support is enabled on UDPTL sessions
T38UdptlIpv6- Whether IPv6 is used for UDPTL Sessions
ToneZone- Set which country's indications to use for channels created for this endpoint.
Language- Set the default language to use for channels created for this endpoint.
RecordOnFeature- The feature to enact when one-touch recording is turned on.
RecordOffFeature- The feature to enact when one-touch recording is turned off.
AllowTransfer- Determines whether SIP REFER transfers are allowed for this endpoint
UserEqPhone- Determines whether a user=phone parameter is placed into the request URI if the user is determined to be a phone number
SdpOwner- String placed as the username portion of an SDP origin (o=) line.
SdpSession- String used for the SDP session (s=) line.
TosAudio- DSCP TOS bits for audio streams
TosVideo- DSCP TOS bits for video streams
CosAudio- Priority for audio streams
CosVideo- Priority for video streams
AllowSubscribe- Determines if endpoint is allowed to initiate subscriptions with Asterisk.
SubMinExpiry- The minimum allowed expiry time for subscriptions initiated by the endpoint.
FromUser- Username to use in From header for requests to this endpoint.
FromDomain- Domain to user in From header for requests to this endpoint.
MwiFromUser- Username to use in From header for unsolicited MWI NOTIFYs to this endpoint.
RtpEngine- Name of the RTP engine to use for channels created for this endpoint
DtlsVerify- Verify that the provided peer certificate is valid
DtlsRekey- Interval at which to renegotiate the TLS session and rekey the SRTP session
DtlsCertFile- Path to certificate file to present to peer
DtlsPrivateKey- Path to private key for certificate file
DtlsCipher- Cipher to use for DTLS negotiation
DtlsCaFile- Path to certificate authority certificate
DtlsCaPath- Path to a directory containing certificate authority certificates
DtlsSetup- Whether we are willing to accept connections, connect to the other party, or both.
SrtpTag32- Determines whether 32 byte tags should be used instead of 80 byte tags.
RedirectMethod- How redirects received from an endpoint are handled
SetVar- Variable set on a channel involving the endpoint.
MessageContext- Context to route incoming MESSAGE requests to.
Accountcode- An accountcode to set automatically on any channels created for this endpoint.
DeviceState- The aggregate device state for this endpoint.
ActiveChannels- The number of active channels associated with this endpoint.
This documentation was imported from Asterisk Version GIT-13-ed34bbd336cae7