Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Expand
A Complete TXT Configuration Example
A Complete TXT Configuration Example
Code Block
borderStylesolid
titleA Complete TXT Configuration Example
<<VOIP CONFIG FILE>>Version:2.0000000000                      

<NET CONFIG MODULE>
WAN TYPE           :0
WAN IP             :192.168.1.179
WAN Subnet Mask    :255.255.255.0
WAN Gateway        :192.168.1.1
Domain Name        :
Primary DNS        :8.8.8.8
Secondary DNS      :202.96.134.133
Enable DHCP        :1
DHCP Auto DNS      :1
DHCP Auto Time     :1
DHCP Option 100-101:1
Use Vendor Class ID:0
Vendor Class ID    :Asterisk
Enable PPPoE       :0
PPPoE User         :user123
PPPoE Password     :password
ARP Cache Life     :2
WAN6 IP            :
WAN6 IP PREFIX     :
WAN6 Gateway       :
Domain6 Name       :
Primary DNS6       :
Secondary DNS6     :
Enable DHCP6       :1
DHCP6 Auto DNS     :1
DHCP6 Auto Time    :0
Use Vendor6 Class ID:0
Vendor6 Class ID   :
--WIFI Config--    :
WIFI Enable        :0

<MM CONFIG MODULE>
G723 Bit Rate      :1
ILBC Payload Type  :97
ILBC Payload Len   :20
AMR Payload Type   :108
AMRWB Payload Type :109
G726-16 Payload Type:103
G726-24 Payload Type:104
G726-32 Payload Type:102
G726-40 Payload Type:105
Dtmf Payload Type  :101
Opus Payload Type  :107
Opus Sample  Rate  :0
VAD                :0
H264 Payload Type  :117
Resv Audio Band    :0
RTP Initial Port   :10000
RTP Port Quantity  :1000
RTP Keep Alive     :0
RTCP CNAME User    :
RTCP CNAME Host    :
Select Your Tone   :11
Sidetone GAIN      :1
Play Egress DTMF   :0
Dial Tone          :350+440/0
Ringback Tone      :440+480/2000,0/4000
Busy Tone          :480+620/500,0/500
Congestion Tone    :
Call waiting Tone  :440/300,0/10000,440/300,0/10000,0/0
Holding Tone       :
Error Tone         :
Stutter Tone       :
Information Tone   :
Dial Recall Tone   :350+440/100,0/100,350+440/100,0/100,350+440/100,0/100,350+440/0
Message Tone       :
Howler Tone        :
Number Unobtainable:400/500,0/6000
Warning Tone       :1400/500,0/0
Record Tone        :440/500,0/5000
Auto Answer Tone   :
--PHONE CONFIG--   :
Audio Codec Sets   :PCMU,PCMA,G726-32,G729,G723,iLBC,AMR,opus,G722
Video Codec Sets   :H264
Video Frame Rate   :25
Video Bit Rate     :2000000
Video Resolution   :4
Video Negotiate Dir:2

<SIP CONFIG MODULE>
SIP  Port          :5060
STUN Server        :
STUN Port          :3478
STUN Refresh Time  :50
SIP Wait Stun Time :800
Extern NAT Addrs   :
Reg Fail Interval  :32
SIP Pswd Encryption:0
Strict BranchPrefix:0
Video Mute Attr    :0
Enable Group Backup:0
Enable RFC4475     :1
Strict UA Match    :1
CSTA Enable        :0
Notify Reboot      :0
--SIP Line List--  :
SIP1 Phone Number       :
SIP1 Display Name       :
SIP1 Sip Name           :
SIP1 Register Addr      :
SIP1 Register Port      :5060
SIP1 Register User      :
SIP1 Register Pswd      :
SIP1 Register TTL       :3600
SIP1 Backup Addr        :
SIP1 Backup Port        :5060
SIP1 Backup Transport   :0
SIP1 Backup TTL         :3600
SIP1 Enable Reg         :0
SIP1 Proxy Addr         :
SIP1 Proxy Port         :5060
SIP1 Proxy User         :
SIP1 Proxy Pswd         :
SIP1 BakProxy Addr      :
SIP1 BakProxy Port      :5060
SIP1 Enable Failback    :0
SIP1 Failback Interval  :1800
SIP1 Signal Failback    :0
SIP1 Signal Retry Counts:3
SIP1 Signal Crypto      :0
SIP1 SigCrypto Key      :
SIP1 Media Crypto       :0
SIP1 MedCrypto Key      :
SIP1 SRTP Auth-Tag      :0
SIP1 Local Domain       :
SIP1 Always FWD         :0
SIP1 Busy FWD           :0
SIP1 No Answer FWD      :0
SIP1 Always FWD Num     :
SIP1 Busy FWD Num       :
SIP1 NoAnswer FWD Num   :
SIP1 FWD Timer          :5
SIP1 Hotline Num        :
SIP1 Enable Hotline     :0
SIP1 WarmLine Time      :0
SIP1 Pickup Num         :
SIP1 Join Num           :
SIP1 Intercom Num       :
SIP1 Ring Type          :default
SIP1 NAT UDPUpdate      :2
SIP1 UDPUpdate TTL      :60
SIP1 Server Type        :0
SIP1 User Agent         :
SIP1 PRACK              :0
SIP1 Keep AUTH          :0
SIP1 Session Timer      :0
SIP1 S Timer Expires    :0
SIP1 Enable GRUU        :0
SIP1 DTMF Mode          :3
SIP1 DTMF Info Mode     :0
SIP1 NAT Type           :0
SIP1 Enable Rport       :1
SIP1 Subscribe          :0
SIP1 Sub Expire         :3600
SIP1 Single Codec       :0
SIP1 CLIR               :0
SIP1 Strict Proxy       :1
SIP1 Direct Contact     :0
SIP1 History Info       :0
SIP1 DNS SRV            :0
SIP1 DNS Mode           :0
SIP1 XFER Expire        :0
SIP1 Ban Anonymous      :0
SIP1 Dial Off Line      :0
SIP1 Quota Name         :0
SIP1 Presence Mode      :0
SIP1 RFC Ver            :1
SIP1 Phone Port         :0
SIP1 Signal Port        :5060
SIP1 Transport          :0
SIP1 Use SRV Mixer      :0
SIP1 SRV Mixer Uri      :
SIP1 Long Contact       :0
SIP1 Auto TCP           :0
SIP1 Uri Escaped        :1
SIP1 Click to Talk      :0
SIP1 MWI Num            :
SIP1 CallPark Num       :
SIP1 Retrieve Num       :
SIP1 MSRPHelp Num       :
SIP1 User Is Phone      :0
SIP1 Auto Answer        :0
SIP1 NoAnswerTime       :5
SIP1 MissedCallLog      :1
SIP1 SvcCode Mode       :0
SIP1 DNDOn SvcCode      :
SIP1 DNDOff SvcCode     :
SIP1 CFUOn SvcCode      :
SIP1 CFUOff SvcCode     :
SIP1 CFBOn SvcCode      :
SIP1 CFBOff SvcCode     :
SIP1 CFNOn SvcCode      :
SIP1 CFNOff SvcCode     :
SIP1 ANCOn SvcCode      :
SIP1 ANCOff SvcCode     :
SIP1 Send ANOn Code     :
SIP1 Send ANOffCode     :
SIP1 CW On Code         :
SIP1 CW Off Code        :
SIP1 VoiceCodecMap      :PCMU,PCMA,G726-32,G729,G723,iLBC,AMR,G722,AMR-WB
SIP1 VideoCodecMap      :
SIP1 BLFList Uri        :
SIP1 BLF Server         :
SIP1 Respond 182        :0
SIP1 Enable BLFList     :0
SIP1 Caller Id Type     :4
SIP1 Syn Clock Time     :0
SIP1 Use VPN            :1
SIP1 Enable DND         :0
SIP1 Inactive Hold      :0
SIP1 Req With Port      :0
SIP1 Update Reg Expire  :1
SIP1 Enable SCA         :0
SIP1 Sub CallPark       :0
SIP1 Sub CC Status      :0
SIP1 Feature Sync       :0
SIP1 Enable XferBack    :0
SIP1 XferBack Time      :35
SIP1 Use Tel Call       :0
SIP1 Enable Preview     :0
SIP1 Preview Mode       :1
SIP1 TLS Version        :0
SIP1 CSTA Number        :
SIP1 Enable ChgPort     :0
SIP1 VQ Name            :
SIP1 VQ Server          :
SIP1 VQ Server Port     :5060
SIP1 VQ HTTP Server     :
SIP1 Flash Mode         :0
SIP1 Content Type       :
SIP1 Content Body       :
SIP1 Unregister On Boot :0
SIP1 Enable MAC Header  :0
SIP1 Enable Register MAC:0
SIP1 Record Start       :Record:on
SIP1 Record Stop        :Record:off
SIP1 BLF Dialog Match   :1

<CALL FEATURE MODULE>
--Port Config--    :
P1 Enable XferDPlan   :1
P1 Enable FwdDPlan    :0
P1 Enable Pre DPlan   :0
P1 IP Dial Prefix     :.
P1 Enable DND         :1
P1 DND Mode           :0
P1 Enable Space DND   :0
P1 DND Start Time     :1500
P1 DND End Time       :1730
P1 Enable White List  :1
P1 Enable Black List  :1
P1 Enable CallBar     :1
P1 Mute Ringing       :0
P1 Ban Dial Out       :0
P1 Ban Empty CID      :0
P1 Accept Any Call    :1
P1 Enable CLIP        :1
P1 CallWaiting        :1
P1 CallTransfer       :1
P1 CallSemiXfer       :1
P1 CallConference     :1
P1 Auto PickupNext    :0
P1 Busy No Line       :1
P1 Auto Onhook        :1
P1 Auto Onhook Time   :3
P1 Enable Intercom    :1
P1 Intercom Mute      :0
P1 Intercom Tone      :1
P1 Intercom Barge     :1
P1 Use Auto Redial    :0
P1 Redial EnterCallLog:0
P1 AutoRedial Delay   :30
P1 AutoRedial Times   :5
P1 Call Complete      :0
P1 CHolding Tone      :1
P1 CWaiting Tone      :1
P1 Hide DTMF Type     :0
P1 Talk DTMF Tone     :1
P1 Dial DTMF Tone     :1
P1 Psw Dial Mode      :0
P1 Psw Dial Length    :0
P1 Psw Dial Prefix    :
P1 Enable MultiLine   :1
P1 Allow IP Call      :1
P1 Caller Name Type   :0
P1 Mute For Ring      :0
P1 Auto Handle Video  :1
P1 Default Ans Mode   :2
P1 Default Dial Mode  :1
P1 Hold To Transfer   :0
P1 Enable PreDial     :1
P1 Default Ext Line   :1
P1 Enable Def Line    :0
P1 Enable SelLine     :1
P1 Ring in Headset    :0
P1 Auto Headset       :0
P1 DND Return Code    :480
P1 Busy Return Code   :486
P1 Reject Return Code :603
P1 Contact Type       :0
P1 Enable Country Code:0
P1 Country Code       :
P1 Call Area Code     :
P1 Number Privacy     :0
P1 Privacy Rule       :
P1 Transf DTMF Code   :
P1 Hold DTMF Code     :
P1 Conf DTMF Code     :
--Basic DialPlan-- :
Dial by Pound      :1
BTransfer by Pound :0
Onhook to BXfer    :0
Onhook to AXfer    :0
Conf Onhook to Xfer:0
Dial Fixed Length  :0
Fixed Length Nums  :11
Dial by Timeout    :1
Dial Timeout value :10
Enable E OneSixFour:0
--Alert Info Ring--:
Alert1 Text               :
Alert1 Ring Type          :Type 1

<PHONE FEATURE MODULE>
Menu Password      :789
KeyLock Password   :123
Fast Keylock Code  :
Enable KeyLock     :0
KeyLock Timeout    :0
KeyLock Status     :0
Emergency Call     :110
Push XML IP        :
SIP Number Plan    :0
LDAP Search        :0
Search Path        :0
Caller Display T   :0
CallLog DisplayType:0
Enable Recv SMS    :1
Enable Call History:1
Line Display Format:$name@$protocol$instance
Enable MWI Tone    :0
--Display Input--  :
LCD Title          :Asterisk
LCD Constrast      :5
Enable Energysaving:4
LCD Luminance Level:12
Backlight Off Time :45
Disable CHN IME    :0
Phone Model        :
Host Name          :bcm911188sv
Default Language   :en
Enable Greetings   :0
--Power LED--      :
Power              :0
MWI Or SMS         :3
In Using           :0
Ring               :2
Hold               :0
Mute               :0
Missed Call        :3
--Voice Volume--   :
Handset Vol        :5
Handset Mic Vol    :3
Headset Vol        :5
Headset Mic Vol    :3
Headset Ring Vol   :5
HandFree Vol       :5
HandFree Mic Vol   :3
HandFree Ring Vol  :5
Ring Type          :Type 2
--DateTime Config--:
Enable SNTP        :1
SNTP Server        :0.digium.pool.ntp.org
Second SNTP Server :1.digium.pool.ntp.org
Time Zone          :-32
Time Zone Name     :UTC-8
SNTP Timeout       :5000
DST Type           :1
DST Location       :3
DST Rule Mode      :0
DST Min Offset     :60
DST Start Mon      :3
DST Start Week     :5
DST Start Wday     :0
DST Start Hour     :2
DST End Mon        :10
DST End Week       :5
DST End Wday       :0
DST End Hour       :2
--DateTime Display--:
Enable TimeDisplay :0
Time Display Style :0
Date Display Style :0
Date Separator     :0
--ScreenSaverSoftkey Config-- :
ScreenSoftkey SaverMode Type  :0 Screen Timeout     :0
EnableSoftKey ActivePeriod:0Exit Period One Start   :0
Period One End Time:0
Period Two Start   :0
Period Two End Time:0
Screen Saver App   :
Sleep After Active :0
Sleep Timeout      :0
--Softkey Config-- :
Style :2
Desktop Softkey    :history;contact;dnd;menu;
Talking Softkey    :hold;xfer;conf;end;
Ringing Softkey    :accept;none;forward;reject;
Alerting Softkey   :end;none;none;none;
XAlerting Softkey  :end;none;none;none;
Conference Softkey :hold;none;split;end;
Waiting Softkey    :hold;xfer;conf;end;
Ending Softkey     :repeat;none;none;end;
DialerPre Softkey  :send;2aB;delete;exit;
DialerCall Softkey :repeat;2aB;delete;exit;
DialerXfer Softkey :repeat;2aB;delete;exit;
DialerCfwd Softkey :repeat;2aB;delete;exit;
Desktop Click      :history;status;none;none;none;
Dailer  Click      :none;none;none;none;none;
Call    Click      :none;none;voldown;volup;none;
Desktop Long Press :status;none;none;none;reset;
Softkey Mode       :0
DialerConf Softkey :contact;clogs;redial;video;cancel;
-- Agent Config--  :
Agent Username     :
Agent Password     :
Agent Number       :
Agent Sipline      :0
Agent Status       :0
Agent Status Reason:
--BW Directory--   :
BWDir1 Title              :
BWDir1 URL                :
BWDir1 Username           :
BWDir1 Password           :
BWDir1 SipLine            :0
--BW Calllogs--    :
BWCLog1 Title              :
BWCLog1 URL                :
BWCLog1 Username           :
BWCLog1 Password           :
BWCLog1 SipLine            :0
--LDAP Config--    :
LDAP1 Title              :
LDAP1 Server             :
LDAP1 port               :389
LDAP1 Base               :
LDAP1 Use SSL            :0
LDAP1 Version            :3
LDAP1 Calling Line       :-1
LDAP1 Bind Line          :-1
LDAP1 In Call Search     :0
LDAP1 Out Call Search    :0
LDAP1 Authenticate       :3
LDAP1 Username           :
LDAP1 Password           :
LDAP1 Tel Attr           :telephoneNumber
LDAP1 Mobile Attr        :mobile
LDAP1 Other Attr         :other
LDAP1 Name Attr          :cn sn ou
LDAP1 Sort Attr          :cn
LDAP1 Displayname        :cn
LDAP1 Number Filter      :(|(telephoneNumber=%)(mobile=%)(other=%))
LDAP1 Name Filter        :(|(cn=%)(sn=%))
LDAP1 Max Hits           :50
--Xml PhoneBook--  :
XML-PBook1 Name               :
XML-PBook1 Addr               :
XML-PBook1 UserName           :
XML-PBook1 PassWd             :
XML-PBook1 Sipline            :-1
XML-PBook1 BindLine           :-1

<DEVICE MANAGER MODULE>
Onhook Time        :120

<CTI CONFIG MODULE>
Enabled Active Uri :1
Enabled Action Url :1
Active Uri IP      :
Start Reboot Url   :
Boot Completed Url :
IP Change Url      :
Reg On Url         :
Reg Off Url        :
Reg Failed Url     :
PhoneState Idle Url:
PhoneState Talking :
PhoneState Ringing :
DND On Url         :
DND Off Url        :
Always FWD On Url  :
Always FWD Off Url :
Busy FWD On Url    :
Busy FWD Off Url   :
No Ans FWD On Url  :
No Ans FWD Off Url :
Mute On Url        :
Mute Off Url       :
Incmoing Call Url  :
Outgoing Call Url  :
Call Active Url    :
Call Stop Url      :
Transfer Url       :
Hold On Url        :
Hold Off Url       :
Held On Url        :
Held Off Url       :
Mute On Call Url   :
Mute Off Call Url  :
New Missed call Url:
New MWI Url        :
New SMS Url        :
--CTI AT Config--  :
At Enabled         :0
At Server          :

<MCAST CFG MODULE>
Priority           :0
Enable Priority    :0
--Mcast Addr--     :
MCAST1 Name               :
MCAST1 Host               :
MCAST1 Port               :0

<MMI CONFIG MODULE>
Web Server Type    :0
Web Port           :80
Https Web Port     :443
Remote Control     :1
Enable MMI Filter  :0
Web Authentication :0
Enable Telnet      :0
Telnet Port        :23
Telnet Prompt      :
Logon Timeout      :15
--MMI Account--    :
Account1 Name               :admin
Account1 Password           :789
Account1 Level              :10

<TR069 CONFIG MODULE>
TR069 Tone         :1
CPE SerialNumber   :
ACS Server Type    :1
Enable TR069       :0
ACS URL            :0.0.0.0
ACS UserName       :admin
ACS Password       :admin
ACS Backup URL     :0.0.0.0
ACS BackupUserName :
ACS BackupPassword :
CPE UserName       :dps
CPE Password       :dps
Periodix Interval  :3600
TLS Version        :0
Area Code          :020
STUN Enable        :0
STUN Server Addr   :
STUN Server Port   :3478
STUN Local Port    :30000

<SIP Hotspot MODULE>
Enable Hotspot     :0
Mode               :1
Listen Type        :0
Listen IP          :224.0.2.0
Listen Port        :16360
Own Name           :SIP Hotspot
--Line Conf List-- :
HS1 Enable             :1

<VPN CONFIG MODULE>
VPN mode           :-1
Enable VPN         :0
Enable Nat         :0
Openvpn mode       :0
L2TP Server Address:
L2TP User Name     :
L2TP Password      :
L2TP Negotiate DNS :1
PPTP Server Address:
PPTP User Name     :
PPTP Password      :

<MAINTENANCE CONFIG MODULE>
Contact Update Mode:0
Auto Server Digest :0

<AUTOUPDATE CONFIG MODULE>
Default Username   :
Default Password   :
Input Cfg File Name:
Device Cfg File Key:
Common Cfg File Key:
Download CommonConf:1
Save Provision Info:0
Check FailTimes    :5
Flash Server IP    :
Flash File Name    :
Flash Protocol     :2
Flash Mode         :0
Flash Interval     :1
update PB Interval :720
--Sip Pnp List--   :
PNP Enable         :1
PNP IP             :224.0.1.75
PNP Port           :5060
PNP Transport      :0
PNP Interval       :1
--Net Option--     :
DHCP Option        :66
Dhcp Option 120    :0

<OTA CONFIG MODULE>

<RPS CONFIG MODULE>
Rps Name           :digium

<DIGIUM CONFIG MODULE>
Digium Enable      :1
Lockdown Status    :0
Digium Url         :https://phoneservice.digium.com/json
Pbx User Agent     :

<FIRMWARE CHECK MODULE>
Enable Auto Upgrade:0
Upgrade Server 1   :
Upgrade Server 2   :
Auto Upgrade Interval:24

<QOS CONFIG MODULE>
Enable VLAN        :0
VLAN ID            :256
Enable PVID        :0
PVID Value         :254
Signalling Priority:0
Voice Priority     :0
Video Priority     :0
LAN Port Priority  :0
Enable diffServ    :1
Singalling DSCP    :46
Voice DSCP         :46
Video DSCP         :46
LLDP Transmit      :1
LLDP Refresh Time  :60
LLDP Learn Policy  :1
LLDP Save Learn Data:0
CDP Enable         :0
CDP Refresh Time   :60
DHCP Option Vlan   :0

<LOG CONFIG MODULE>
Level              :INFO
Style              :level,tag
Output Device      :stdout
File Name          :platform.log
File Size          :512KB
Syslog Tag         :platform
Syslog Server      :0.0.0.0
Syslog Server Port :514

<APP CONFIG MODULE>
Watch Dog Enabled  :1
Enable In Access   :0
Enable Out Access   :0

<VQM CONFIG MODULE>
Session Report     :1
Interval Report    :1
Interval Period    :60
MOS-LQ Warning     :40
MOS-LQ Critical    :25
Delay Warning      :150
Delay Critical     :200
Phone Report       :1
WEB Report         :1

<DOT1X CONFIG MODULE>
Xsup Mode          :0
Xsup User          :admin
Xsup Password      :admin
--SSL Mode--       :
Permission CTF     :0
Common Name        :0
CTF mode           :0
Device Cert Mode   :0

<RECORD CONFIG MODULE>
Enabled            :1
Voice Codec        :G729
Record Type        :0
File Size Limit    :8
Server Addr        :
Server Port        :0

<ATE CONFIG MODULE>
ATE Id            :0000000000000000

<UI MAINTAIN CONFIG MODULE>
Timeout To Screensaver :0
User Change Background :0
EHS Headset type :0

<DSSKEY CONFIG MODULE>
Select DsskeyAction:0
Memory Key to BXfer:3
FuncKey Page Num   :5
DSS Home Page      :0
Expand Board Enable:0
Extern1 Page Belong :0
--Dsskey Config1--:
Fkey1 Type               :2
Fkey1 Value              :SIP1
Fkey1 Title              :
--SoftDss Config-- :
Fkey1 Type               :0
Fkey1 Value              :
Fkey1 Title              :
<<END OF FILE>> 

...

Expand
Elements Example
Elements Example
Code Block
borderStylesolid
titleNET CONFIG MODULE Elements
<<VOIP CONFIG FILE>>


<NET CONFIG MODULE>
WAN TYPE           :0
WAN IP             :192.168.1.179
WAN Subnet Mask    :255.255.255.0
WAN Gateway        :192.168.1.1
Domain Name        :
Primary DNS        :8.8.8.8
Secondary DNS      :202.96.134.133
Enable DHCP        :1
DHCP Auto DNS      :1
DHCP Auto Time     :1
DHCP Option 100-101:1
Use Vendor Class ID:0
Vendor Class ID    :Asterisk
Enable PPPoE       :0
PPPoE User         :user123
PPPoE Password     :password
ARP Cache Life     :2
WAN6 IP            :
WAN6 IP PREFIX     :
WAN6 Gateway       :
Domain6 Name       :
Primary DNS6       :
Secondary DNS6     :
Enable DHCP6       :1
DHCP6 Auto DNS     :1
DHCP6 Auto Time    :0
Use Vendor6 Class ID:0
Vendor6 Class ID   :
--WIFI Config--    :
WIFI Enable        :0
<<END OF FILE>>
 

...

Option

Values

Description

WAN TYPEInteger, 0-2, Defaults to 0Defines the type of networking, 0 (IPv4 Only), 1 (IPv6 Only), 2 (IPv4 & IPv6)

WAN IP

IPv4 address

Sets the IPv4 address of the phone.

WAN Subnet MaskIPv4 net maskSets the IPv4 net mask of the phone.
WAN GatewayIPv4 network gatewaySets the IPv4 default gateway / route of the phone.
Domain NameDomain name, as stringSets the default domain search name of the phone.
Primary DNSIPv4 addressSets the primary DNS server of the phone.
Secondary DNSIPv4 addressSets the secondary DNS server of the phone.
Enable DHCPBoolean, Defaults to 1Enables or disables DHCP network configuration request. Defaults to 1.
DHCP Auto DNSBoolean, Defaults to 1Configures the phone to accept DNS servers provided by DHCP. If disabled, the phone will use the DNS servers defined by the PrimaryDNS and SecondaryDNS net configuration elements. Defaults to 1.
DHCP Auto TimeBoolean, Defaults to 1Configures the phone to set its time and SNTP server based upon receipt of DHCP Option 42. If disabled, the phone will use the NTP server as defined by the SNTPServer date configuration element and time as defined in other date configuration elements. Defaults to 1.
DHCP Option 100-101Boolean, Defaults to 1If disabled, the phone will not set its clock according to time as provided by DHCP Options 100 and 101. Defaults to 1.
Use Vendor Class IDBoolean, Defaults to 0Configures the phone to send DHCP Option 61, Vendor Class Identifier. Defaults to 0.
Enable PPPoEBoolean, Defaults to 0Configures the phone to perform PPPoE authentication in order to retrieve its network configuration. Defaults to 0
PPPoE UserStringIf the phone is to use PPPoE authentication, sets the PPPoE authentication username.
PPPoE PasswordStringIf the phone is to use PPPoE authentication, sets the PPPoE authentication password.
ARP Cache LifeTime, in minutes, Defaults to 2Specifies the time in minutes to cache ARP
WAN6 IPIPv6 IP AddressSpecifies the phone's IPv6 address
WAN6 IP PREFIXIPv6 IP Address PrefixSpecifies the phone's IPv6 address prefix
WAN6 GatewayIPv6 AddressSpecifies the phone's IPv6 gateway
Domain6 NameStringSpecifies the IPv6 domain name search
Primary DNS6IPv6 AddressSpecifies the IPv6 primary DNS server address
Secondary DNS6IPv6 AddressSpecifies the IPv6 secondary DNS server address
Enable DHCP6Boolean, Defaults to 1If enabled, directs the phone to use a DHCPv6 server for IPv6 address assignment
DHCP6 auto DNSBoolean Defaults to 1If enabled, directs the phone to retrieve DNS servers from the DHCPv6 server
DHCP6 Auto TimeBoolean Defaults to 0If enabled, directs the phone to retrieve its SNTP server from the DHCPv6 server
Use Vendor6 Class IDBoolean, Defaults to 0If enabeld, the phone will send vendor class ID to the DHCPv6 server
Vendor6 Class IDStringSpecifies the phone's DHCPv6 vendor class ID

...

Expand
Elements
Elements
Code Block
borderStylesolid
titleMM CONFIG MODULE Elements
<<VOIP CONFIG FILE>>

<MM CONFIG MODULE>
G723 Bit Rate      :1
ILBC Payload Type  :97
ILBC Payload Len   :20
AMR Payload Type   :108
AMRWB Payload Type :109
G726-16 Payload Type:103
G726-24 Payload Type:104
G726-32 Payload Type:102
G726-40 Payload Type:105
Dtmf Payload Type  :101
Opus Payload Type  :107
Opus Sample  Rate  :0
VAD                :0
H264 Payload Type  :117
Resv Audio Band    :0
RTP Initial Port   :10000
RTP Port Quantity  :1000
RTP Keep Alive     :0
RTCP CNAME User    :
RTCP CNAME Host    :
Select Your Tone   :11
Sidetone GAIN      :1
Play Egress DTMF   :0
Dial Tone          :350+440/0
Ringback Tone      :440+480/2000,0/4000
Busy Tone          :480+620/500,0/500
Congestion Tone    :
Call waiting Tone  :440/300,0/10000,440/300,0/10000,0/0
Holding Tone       :
Error Tone         :
Stutter Tone       :
Information Tone   :
Dial Recall Tone   :350+440/100,0/100,350+440/100,0/100,350+440/100,0/100,350+440/0
Message Tone       :
Howler Tone        :
Number Unobtainable:400/500,0/6000
Warning Tone       :1400/500,0/0
Record Tone        :440/500,0/5000
Auto Answer Tone   :
--PHONE CONFIG--   :
Audio Codec Sets   :PCMU,PCMA,G726-32,G729,G723,iLBC,AMR,opus,G722
Video Codec Sets   :H264
Video Frame Rate   :25
Video Bit Rate     :2000000
Video Resolution   :4
Video Negotiate Dir:2
<<END OF FILE>>
 

...

Option

Values

Description

G723 Bit Rate

Boolean, Defaults to 1

Sets the bitrate type to be used for G.723.1 voice codec encoding. 0 sets encoding to 5.3kbit/s. 1 sets encoding to 6.3kbit/s. Defaults to 1

ILBC Payload TypeInteger, Defaults to 97.Sets the RTP payload type to be used for iLBC voice codec encoding. Defaults to 97.
ILBC Payload Len20, 30Sets the iLBC voice codec block length duration in milliseconds. 20 sets 20ms. 30 sets 30ms. Defaults to 20.
AMR Payload TypeInteger, Defaults to 108Sets the RTP payload type to be used for AMR voice codec encoding. Defaults to 108.
AMRWB Payload TypeInteger, Defaults to 109Sets the RTP payload type to be used for AMR (G.722.2) voice codec encoding. Defaults to 109.
G726-16 Payload TypeInteger, Defaults to 103Sets the RTP payload type to be used for G726-16 voice codec encoding. Defaults to 103.
G726-24 Payload TypeInteger, Defaults to 104Sets the RTP payload type to be used for G726-24 voice codec encoding. Defaults to 104.
G726-32 Payload TypeInteger, Defaults to 102Sets the RTP payload type to be used for G726-32 voice codec encoding. Defaults to 102.
G726-40 Payload TypeInteger, Defaults to 105Sets the RTP payload type to be used for G726-40 voice codec encoding. Defaults to 105.
Dtmf Payload TypeInteger, Defaults to 101Sets the RTP payload type to be used for RFC2833 DTMF events. Defaults to 101.
Opus Payload TypeInteger, Defaults to 107Sets the RTP payload type to be used for Opus voice codec encoding. Defaults to 107
Opus Sample RateBoolean, Defaults to 0Sets the Opus voice codec encoding type. 0 sets Narrowband. 1 sets Wideband. Defaults to 0.
VADBoolean, Defaults to 0Enables or disables Voice Activity Detection (VAD) for certain (G.729) codecs. Defaults to 0.
H264 Payload TypeInteger, Defaults to 117Sets the RTP payload type to be used for H.264 video codec encoding. Defaults to 117
Resv Audio BandBoolean, Defaults to 0If enabled, the phone will reduce video bandwidth to prioritize audio. Defaults to 0.
RTP Initial PortInteger, Defaults to 10000Sets the starting RTP port used for calls. Defaults to 10000
RTP Port QuantityInteger, Defaults to 200Sets the number of RTP ports to span across before recycling. Defaults to 1000.
RTP Keep AliveBoolean, Defaults to 0Enables or disables the sending of a periodic RTP keep alive packet. Defaults to 0.
RTCP CNAME UserStringSets the RTCP CNAME User part for RTCP Sender reports generated by the phone.
RTCP CNAME HostStringSets the RTCP CNAME Host part for RTCP Sender reports generated by the phone.
Select Your ToneInteger, Defaults to 11

Sets the phone's default tones based upon country as follows:

Australia, 15
Austria, 22
Belgium, 0
Brazil, 16
Canada, 18
Chile, 20
China, 1
Croatia, 17
Czech Republic, 12
Denmark, 23
Finland, 24
France, 25
Germany, 2
Greece, 26
Hungary, 27
India, 29
Israel, 3
Italy, 21
Japan, 4
Lithuania, 28
Mexico, 30
New Zealand, 31
Netherlands, 5
Norway, 6
Portugal, 32
Russia, 19
South Africa, 14
South Korea, 7
Spain, 33
Sweden, 8
Switzerland, 9
Taiwan, 10
United Kingdom, 13
United States, 11

Sidetone GAINBoolean, Defaults to 1If enabled, the phone will provide sidetone
Play Egresss DTMFBoolean, Defaults to 0Currently unused
Dial ToneString

Sets the dialing tone pattern, as a tone or combination of tones with a defined duration, optionally followed by other tones, e.g.

350+440/0

Ringback ToneString

Sets the ring back tone pattern, as a tone or combination of tones with a defined duration, optionally followed by other tones, e.g.
440+480/2000,0/4000

Busy ToneString

Sets the ring back tone pattern, as a tone or combination of tones with a defined duration, optionally followed by other tones, e.g.
480+620/500,0/500

Congestion ToneString

Sets the congestion tone pattern, as a tone or combination of tones with a defined duration, optionally followed by other tones.

Call waiting ToneStringSets the call waiting tone pattern, as a tone or combination of tones with a defined duration, optionally followed by other tones, e.g.
440/300,0/10000,440/300,0/10000,0/0
Holding ToneString

Sets the holding tone pattern, as a tone or combination of tones with a defined duration, optionally followed by other tones.

Error ToneStringSets the error tone pattern, as a tone or combination of tones with a defined duration, optionally followed by other tones.
Stutter ToneStringSets the stutter tone pattern, as a tone or combination of tones with a defined duration, optionally followed by other tones.
Information ToneStringSets the information tone pattern, as a tone or combination of tones with a defined duration, optionally followed by other tones.

Dial Recall Tone

String Sets the dial recall tone pattern, as a tone or combination of tones with a defined duration, optionally followed by other tones, e.g.

350+440/100,0/100,350+440/100,0/100,350+440/100,0/100,350+440/0

Message Tone

StringSets the message tone pattern, as a tone or combination of tones with a defined duration, optionally followed by other tones.
Howler ToneString Sets the howler tone pattern, as a tone or combination of tones with a defined duration, optionally followed by other tones.

Number Unobtainable

String Sets the number unobtainable tone pattern, as a tone or combination of tones with a defined duration, optionally followed by other tones, e.g.

400/500,0/6000

Warning Tone

StringSets the warning tone pattern, as a tone or combination of tones with a defined duration, optionally followed by other tones, e.g.

1400/500,0/0

Record Tone

StringSets the record tone pattern, as a tone or combination of tones with a defined duration, optionally followed by other tones, e.g.

440/500,0/5000

Auto Answer Tone

StringSets the auto answer tone pattern, as a tone or combination of tones with a defined duration, optionally followed by other tones.

...

Expand
Elements
Elements
Code Block
borderStylesolid
titleSIP CONFIG MODULE Elements
<<VOIP CONFIG FILE>>

<SIP CONFIG MODULE>
SIP  Port          :5060
STUN Server        :
STUN Port          :3478
STUN Refresh Time  :50
SIP Wait Stun Time :800
Extern NAT Addrs   :
Reg Fail Interval  :32
SIP Pswd Encryption:0
Strict BranchPrefix:0
Video Mute Attr    :0
Enable Group Backup:0
Enable RFC4475     :1
Strict UA Match    :1
CSTA Enable        :0
Notify Reboot      :0
--SIP Line List--  :
SIP1 Phone Number       :
SIP1 Display Name       :
SIP1 Sip Name           :
SIP1 Register Addr      :
SIP1 Register Port      :5060
SIP1 Register User      :
SIP1 Register Pswd      :
SIP1 Register TTL       :3600
SIP1 Backup Addr        :
SIP1 Backup Port        :5060
SIP1 Backup Transport   :0
SIP1 Backup TTL         :3600
SIP1 Enable Reg         :0
SIP1 Proxy Addr         :
SIP1 Proxy Port         :5060
SIP1 Proxy User         :
SIP1 Proxy Pswd         :
SIP1 BakProxy Addr      :
SIP1 BakProxy Port      :5060
SIP1 Enable Failback    :0
SIP1 Failback Interval  :1800
SIP1 Signal Failback    :0
SIP1 Signal Retry Counts:3
SIP1 Signal Crypto      :0
SIP1 SigCrypto Key      :
SIP1 Media Crypto       :0
SIP1 MedCrypto Key      :
SIP1 SRTP Auth-Tag      :0
SIP1 Local Domain       :
SIP1 Always FWD         :0
SIP1 Busy FWD           :0
SIP1 No Answer FWD      :0
SIP1 Always FWD Num     :
SIP1 Busy FWD Num       :
SIP1 NoAnswer FWD Num   :
SIP1 FWD Timer          :5
SIP1 Hotline Num        :
SIP1 Enable Hotline     :0
SIP1 WarmLine Time      :0
SIP1 Pickup Num         :
SIP1 Join Num           :
SIP1 Intercom Num       :
SIP1 Ring Type          :default
SIP1 NAT UDPUpdate      :2
SIP1 UDPUpdate TTL      :60
SIP1 Server Type        :0
SIP1 User Agent         :
SIP1 PRACK              :0
SIP1 Keep AUTH          :0
SIP1 Session Timer      :0
SIP1 S Timer Expires    :0
SIP1 Enable GRUU        :0
SIP1 DTMF Mode          :3
SIP1 DTMF Info Mode     :0
SIP1 NAT Type           :0
SIP1 Enable Rport       :1
SIP1 Subscribe          :0
SIP1 Sub Expire         :3600
SIP1 Single Codec       :0
SIP1 CLIR               :0
SIP1 Strict Proxy       :1
SIP1 Direct Contact     :0
SIP1 History Info       :0
SIP1 DNS SRV            :0
SIP1 DNS Mode           :0
SIP1 XFER Expire        :0
SIP1 Ban Anonymous      :0
SIP1 Dial Off Line      :0
SIP1 Quota Name         :0
SIP1 Presence Mode      :0
SIP1 RFC Ver            :1
SIP1 Phone Port         :0
SIP1 Signal Port        :5060
SIP1 Transport          :0
SIP1 Use SRV Mixer      :0
SIP1 SRV Mixer Uri      :
SIP1 Long Contact       :0
SIP1 Auto TCP           :0
SIP1 Uri Escaped        :1
SIP1 Click to Talk      :0
SIP1 MWI Num            :
SIP1 CallPark Num       :
SIP1 Retrieve Num       :
SIP1 MSRPHelp Num       :
SIP1 User Is Phone      :0
SIP1 Auto Answer        :0
SIP1 NoAnswerTime       :5
SIP1 MissedCallLog      :1
SIP1 SvcCode Mode       :0
SIP1 DNDOn SvcCode      :
SIP1 DNDOff SvcCode     :
SIP1 CFUOn SvcCode      :
SIP1 CFUOff SvcCode     :
SIP1 CFBOn SvcCode      :
SIP1 CFBOff SvcCode     :
SIP1 CFNOn SvcCode      :
SIP1 CFNOff SvcCode     :
SIP1 ANCOn SvcCode      :
SIP1 ANCOff SvcCode     :
SIP1 Send ANOn Code     :
SIP1 Send ANOffCode     :
SIP1 CW On Code         :
SIP1 CW Off Code        :
SIP1 VoiceCodecMap      :PCMU,PCMA,G726-32,G729,G723,iLBC,AMR,G722,AMR-WB
SIP1 VideoCodecMap      :
SIP1 BLFList Uri        :
SIP1 BLF Server         :
SIP1 Respond 182        :0
SIP1 Enable BLFList     :0
SIP1 Caller Id Type     :4
SIP1 Syn Clock Time     :0
SIP1 Use VPN            :1
SIP1 Enable DND         :0
SIP1 Inactive Hold      :0
SIP1 Req With Port      :0
SIP1 Update Reg Expire  :1
SIP1 Enable SCA         :0
SIP1 Sub CallPark       :0
SIP1 Sub CC Status      :0
SIP1 Feature Sync       :0
SIP1 Enable XferBack    :0
SIP1 XferBack Time      :35
SIP1 Use Tel Call       :0
SIP1 Enable Preview     :0
SIP1 Preview Mode       :1
SIP1 TLS Version        :0
SIP1 CSTA Number        :
SIP1 Enable ChgPort     :0
SIP1 VQ Name            :
SIP1 VQ Server          :
SIP1 VQ Server Port     :5060
SIP1 VQ HTTP Server     :
SIP1 Flash Mode         :0
SIP1 Content Type       :
SIP1 Content Body       :
SIP1 Unregister On Boot :0
SIP1 Enable MAC Header  :0
SIP1 Enable Register MAC:0
SIP1 Record Start       :Record:on
SIP1 Record Stop        :Record:off
SIP1 BLF Dialog Match   :1
<MM CONFIG MODULE>
--PHONE CONFIG--   :
Audio Codec Sets   :PCMU,PCMA,G726-32,G729,G723,iLBC,AMR,opus,G722
Video Codec Sets   :H264
Video Frame Rate   :25
Video Bit Rate     :2000000
Video Resolution   :4
Video Negotiate Dir:2
<<END OF FILE>>
 

...

Expand
Elements Example
Elements Example
Code Block
borderStylesolid
titleSIP Line List Element Examples
<<VOIP CONFIG FILE>>
 
<SIP CONFIG MODULE>
--SIP Line List--  :
SIP1 Phone Number       :
SIP1 Display Name       :
SIP1 Sip Name           :
SIP1 Register Addr      :
SIP1 Register Port      :5060
SIP1 Register User      :
SIP1 Register Pswd      :
SIP1 Register TTL       :3600
SIP1 Backup Addr        :
SIP1 Backup Port        :5060
SIP1 Backup Transport   :0
SIP1 Backup TTL         :3600
SIP1 Enable Reg         :0
SIP1 Proxy Addr         :
SIP1 Proxy Port         :5060
SIP1 Proxy User         :
SIP1 Proxy Pswd         :
SIP1 BakProxy Addr      :
SIP1 BakProxy Port      :5060
SIP1 Enable Failback    :0
SIP1 Failback Interval  :1800
SIP1 Signal Failback    :0
SIP1 Signal Retry Counts:3
SIP1 Signal Crypto      :0
SIP1 SigCrypto Key      :
SIP1 Media Crypto       :0
SIP1 MedCrypto Key      :
SIP1 SRTP Auth-Tag      :0
SIP1 Local Domain       :
SIP1 Always FWD         :0
SIP1 Busy FWD           :0
SIP1 No Answer FWD      :0
SIP1 Always FWD Num     :
SIP1 Busy FWD Num       :
SIP1 NoAnswer FWD Num   :
SIP1 FWD Timer          :5
SIP1 Hotline Num        :
SIP1 Enable Hotline     :0
SIP1 WarmLine Time      :0
SIP1 Pickup Num         :
SIP1 Join Num           :
SIP1 Intercom Num       :
SIP1 Ring Type          :default
SIP1 NAT UDPUpdate      :2
SIP1 UDPUpdate TTL      :60
SIP1 Server Type        :0
SIP1 User Agent         :
SIP1 PRACK              :0
SIP1 Keep AUTH          :0
SIP1 Session Timer      :0
SIP1 S Timer Expires    :0
SIP1 Enable GRUU        :0
SIP1 DTMF Mode          :3
SIP1 DTMF Info Mode     :0
SIP1 NAT Type           :0
SIP1 Enable Rport       :1
SIP1 Subscribe          :0
SIP1 Sub Expire         :3600
SIP1 Single Codec       :0
SIP1 CLIR               :0
SIP1 Strict Proxy       :1
SIP1 Direct Contact     :0
SIP1 History Info       :0
SIP1 DNS SRV            :0
SIP1 DNS Mode           :0
SIP1 XFER Expire        :0
SIP1 Ban Anonymous      :0
SIP1 Dial Off Line      :0
SIP1 Quota Name         :0
SIP1 Presence Mode      :0
SIP1 RFC Ver            :1
SIP1 Phone Port         :0
SIP1 Signal Port        :5060
SIP1 Transport          :0
SIP1 Use SRV Mixer      :0
SIP1 SRV Mixer Uri      :
SIP1 Long Contact       :0
SIP1 Auto TCP           :0
SIP1 Uri Escaped        :1
SIP1 Click to Talk      :0
SIP1 MWI Num            :
SIP1 CallPark Num       :
SIP1 Retrieve Num       :
SIP1 MSRPHelp Num       :
SIP1 User Is Phone      :0
SIP1 Auto Answer        :0
SIP1 NoAnswerTime       :5
SIP1 MissedCallLog      :1
SIP1 SvcCode Mode       :0
SIP1 DNDOn SvcCode      :
SIP1 DNDOff SvcCode     :
SIP1 CFUOn SvcCode      :
SIP1 CFUOff SvcCode     :
SIP1 CFBOn SvcCode      :
SIP1 CFBOff SvcCode     :
SIP1 CFNOn SvcCode      :
SIP1 CFNOff SvcCode     :
SIP1 ANCOn SvcCode      :
SIP1 ANCOff SvcCode     :
SIP1 Send ANOn Code     :
SIP1 Send ANOffCode     :
SIP1 CW On Code         :
SIP1 CW Off Code        :
SIP1 VoiceCodecMap      :PCMU,PCMA,G726-32,G729,G723,iLBC,AMR,G722,AMR-WB
SIP1 VideoCodecMap      :
SIP1 BLFList Uri        :
SIP1 BLF Server         :
SIP1 Respond 182        :0
SIP1 Enable BLFList     :0
SIP1 Caller Id Type     :4
SIP1 Syn Clock Time     :0
SIP1 Use VPN            :1
SIP1 Enable DND         :0
SIP1 Inactive Hold      :0
SIP1 Req With Port      :0
SIP1 Update Reg Expire  :1
SIP1 Enable SCA         :0
SIP1 Sub CallPark       :0
SIP1 Sub CC Status      :0
SIP1 Feature Sync       :0
SIP1 Enable XferBack    :0
SIP1 XferBack Time      :35
SIP1 Use Tel Call       :0
SIP1 Enable Preview     :0
SIP1 Preview Mode       :1
SIP1 TLS Version        :0
SIP1 CSTA Number        :
SIP1 Enable ChgPort     :0
SIP1 VQ Name            :
SIP1 VQ Server          :
SIP1 VQ Server Port     :5060
SIP1 VQ HTTP Server     :
SIP1 Flash Mode         :0
SIP1 Content Type       :
SIP1 Content Body       :
SIP1 Unregister On Boot :0
SIP1 Enable MAC Header  :0
SIP1 Enable Register MAC:0
SIP1 Record Start       :Record:on
SIP1 Record Stop        :Record:off
SIP1 BLF Dialog Match   :1
<<END OF FILE>>
 

Option

Values

Description

Phone Number

String

Sets the identifier used for the user part of the From and To lines in the phone's SIP messaging.

Display Name

String

Sets the quoted string name identifier used in the From and To (REGISTER only) in the phone's SIP messaging.

Sip Name

String

Sets a name for the SIP line, visible within the web admin UI of the phone.

Register Addr

IPv4 address or hostname

Sets the IPv4 address or hostname of the SIP Registrar.

Register Port

Integer, 1-65535

Sets the port used to contact the SIP Registrar. Defaults to 5060

Register User

StringSets the SIP authentication user.

Register Pswd

StringSets the SIP authentication password.

Register TTL

Integer, in seconds, Defaults to 3600Sets the default Expires timer for SIP registration. Defaults to 3600.
Backup AddrIPv4 address or hostnameSpecifies the address of a backup registration server for the account.
Backup PortInteger, 1-65535, Defaults to 5060Specifies the backup server registration port. Defaults to 5060.
Backup TransportInteger, 0-3Specifies the transport type to be used for the backup registration server.
Backup TTLInteger, in seconds, Defaults to 3600Specifies the default Expires timer for registration to the backup SIP server. Defaults to 3600.

Enable Reg

Boolean, Defaults to 0Enables or disables SIP registration for this line.

Proxy Addr

IPv4 address or hostnameSets the IPv4 address or hostname for the SIP Proxy. Defaults to none.

Proxy Port

Integer, 1-65535Sets the port used to contact the SIP Proxy. Defaults to 5060.

Proxy User

StringSets the SIP proxy authentication user.

Proxy Pswd

StringSets the SIP proxy authentication password.

BakProxy Addr

IPv4 address or hostnameSets the IPv4 address or hostname for the backup SIP Proxy. Defaults to none.

BakProxy Port

Integer, 1-65535Sets the port used to contact the backup SIP Proxy. Defaults to 5060.

Enable Failback

Boolean, Defaults to 0Sets whether the phone, whereby it is configured with both a primary and a backup proxy, should, whereupon detection that the primary proxy is operational again after having previously failed, resume sending calls to the primary server. If enabled, the phone will switch back to the primary proxy. If disabled, the phone will continue to send calls to the backup. Defaults to 0.
Failback IntervalInteger, in seconds, Defaults to 1800Specifies the period at which a separate register is sent to the primary server to determine whether it has restored
Signal FailbackBoolean, Defaults to 0If enabled, will enable register failback.
Signal Retry CountsInteger, Defaults to 3Specifies the number of packets the phone will retransmit before considering the server to have failed.
Signal CryptoBoolean, Defaults to 0If enabled, causes the phone to encrypt SIP signaling. Defaults to 0.

SigCrypto Key

StringSets the key used to encrypt SIP signaling.

Media Crypto

Boolean, Defaults to 0If enabled, causes the phone to encrypt RTP media. Defaults to 0.

MedCrypto Key

StringSets the key used to encrypt RTP media.

SRTP Auth-Tag

Intege, Defaults to 0If set to 0, the phone will utilizes 80 byte SRTP tags, encrypting RTP using AES_CM_128_HMAC_SHA_80. If set to 1, the phone will utilize 32 byte SRTP tags, encrypting RTP using AES_CM_128_HMAC_SHA_32. Defaults to 0.
Local DomainStringsSets the domain name used in SIP registration

Always FWD

Boolean, Defaults to 0If enabled, the phone will unconditionally forward calls. Defaults to 0.

Busy FWD

Boolean, Defaults to 0If enabled, the phone will forward calls whenever it is busy. Defaults to 0.

No Answer FWD

Boolean, Defaults to 0If enabled, the phone will forward calls that are not answered. Defaults to 0.

Always FWD Num

StringSets the forwarding number used in conjunction with the AlwaysFWD option.

Busy FWD Num

StringSets the forwarding number used in conjunction with the BusyFWD option.

NoAnswer FWD Num

StringSets the forwarding number used in conjunction with the NoAnswerFWD option.

FWD Timer

Integer, in seconds, Defaults to 5Sets the time, in seconds, applied to the NoAnswerFWD option. Defaults to 5.

Hotline Num

StringSets the number to be dialed when the off-hook time is greater than the WarmLineTime and EnableHotline is enabled.
Enable HotlineBoolean, Defaults to 0If enabled, and the phone has been off-hook longer than the WarmLineTime, the phone will automatically dial the number defined by HotlineNum.
WarmLine TimeInteger, in seconds, 0-9, Defaults to 0.Sets the amount of time the phone must remain off-hook before attempting to execute Hotline functionality.

Pickup Num

StringSets the dialing prefix applied to calls that are picked up using function keys configured for Pickup functionality.

Join Num

StringSets the dialing prefix applied to calls that are joined using function keys configured for Join functionality.

Ring Type

Integer, 1-9, Defaults to 1Sets the default ringing type to be used. Defaults to 1.
NAT UDPUpdateInteger, 0-2, Defaults to 1If set to 1, the phone will send SIP OPTION packets to the server after each UDPUpdate_TTL time.  If set to 2, the phone will send a CRLF to the server after each UDPUpdate_TTL time.  If set to 0, the phone will send nothing.  Defaults to 1.
UDPUpdate TTLInteger, in seconds, Defaults to 60Sets the timer used by the NATUDPUpdate option.
Server TypeInteger

Sets special compatibility settings required for specific server types. The following types are supported:

3CX - 31
BOTE - 6
BroadSoft - 28
Cellcom - 30
COMMON - 0
CONFIG - 23 
FUJITSU - 24
Karel UCAP - 29
MITEL - 17
MS_RP - 22
NET2PHONE - 1
NORTEL - 14
SOFTX3000 - 26

Defaults to 0. 

User AgentStringSets the SIP User-Agent passed by the phone when communicating. SHOULD THIS DEFAULT TO A30?
PRACKBoolean, Defaults to 0Enables or disables SIP PRACK functionality within the phone. Defaults to 0.
Keep AUTHBoolean, Defaults to 0If enabled, the phone will, on SIP re-registration, send authentication in the initial REGISTER rather than waiting to send it after receiving a 401 Unauthorized message. Defaults to 0.

Session Timer

Boolean, Defaults to 0If enabled, the phone will send SIP session timers throughout the call, ending the call when there is no reply. Defaults to 0.
S Timer ExpiresInteger, in secondsSets the SIP Session timer timeout value in seconds.
Enable GRUUBoolean, Defaults to 0If enabled, the phone will append GRUU information to the Contact header of INVITEs. Defaults to 0.

DTMF Mode

Integer, 0-3, Defaults to 3

Sets the DTMF method to be used by the phone, as follows:

Inband - 0
RFC2833 - 1
SIP INFO - 2
Auto - 3 

DTMF Inf oModeInteger, 0-1, Defaults to 0If set to 1, and the phone is configured for SIP INFO DTMF, the * and # keypresses will send "*" and "#" respectively. If set to 0, and the phone is configured for SIP INFO DTMF, the * and # keypresses will send as 10 and 11 respectively. Defaults to 0.

NAT Type

Boolean, Defaults to 0If enabled, STUN will be used. Defaults to 0.

Enable Rport

Boolean, Defaults to 0If enabled, the phone will send rport to assist with NAT traversal as per RFC3581. Defaults to 0.

Subscribe

Boolean, Defaults to 0If enabled, the phone will subscribe for Message Waiting Indicator (MWI). Defaults to 0.

Sub Expire

Integer, in seconds, Defaults to 3600The timer at half-of-which, the phone will re-subscribe. Defaults to 3600.

Single Codec

Boolean, Defaults to 0If enabled, the phone will respond to SIP messages with only one codec, rather than with all codec capabilities. Defaults to 0.

CLIR

Integer, Defaults to 0Specifies the method of anonymous calling to use. When set to 0, the phone calls normally. When set to 1, the phone calls anonymously according to RFC3323. When set to 2, the phone calls anonymously according to RFC3325.

Strict Proxy

Boolean, Defaults to 0When enabled, respond using the source address, not the Via address. Defaults to 0.

Direct Contact

Boolean, Defaults to 0When enabled, attempt to directly communicate with the called party, not using the intermediary proxy or UA. Defaults to 0.
History InfoBoolean, Defaults to 0When enabled, call history information for the line will be provided. Defaults to 0. This configuration item is currently unused.

DNS SRV

Boolean, Defaults to 0If enabled, the phone will perform DNS SRV resolution for outgoing requests. Defaults to 0.

DNS Mode

Integer, 0-2, Defaults to 0.Sets the type of host resolution to perform. When set to 0, the phone will use A records. When set to 1, the phone will use SRV records. When set to 2, the phone will use NAPTR records.

XFER Expire

Integer, Defaults to 0Specifies the time, in seconds, after which the phone will send a BYE following attended transfer hang up.

Ban Anonymous

Boolean, Defaults to 0When enabled, the phone will reject anonymous calls. Defaults to 0.

Dial Off Line

Boolean, Defaults to 0If enabled, the phone will attempt to place outgoing calls, even when it is unregistered. If disabled, the phone will not be able to place outgoing calls when it is unregistered. Defaults to 0.

Quota Name

Boolean, Defaults to 0If enabled, the phone will encapsulate the Display Name that it sends in SIP signaling inside of quotation marks. Defaults to 0.

Presence Mode

Boolean, Default to 0When enabled, the phone utilizes special presence handling for Wuchuan servers. Defaults to 0.

RFC Ver

Integer, Defaults to 1Specifies the SIP signaling RFC standard to utilize. When set to 0, the phone will communicate using RFC2543 compliant signaling. When set to 1, the phone will communicate using RFC3261 compliant signaling. Defaults to 1.

Phone Port

UnusedUnused

Signal Port

Integer, Defaults to 5060Sets the phone's local SIP signaling port. Defaults to 5060.

Transport

Integer, 0, 1, 3, Defaults to 0

Sets the transport type for SIP signaling.

UDP - 0
TCP - 1
TLS - 3 

Use SRV Mixer

Boolean, Defaults to 0When enabled, the phone utilizes server-side conferencing support. Defaults to 0.
SRV Mixer UriStringSets the URI to be used for server-side conferencing when the UseSRVMixer option is enabled.

Long Contact

Boolean, Defaults to 0If enabled, allows the phone to process long Contact fields. Defaults to 0.

Auto TCP

Boolean, Defaults to 0When enabled, if the packet size of a UDP signaling packet is to exceed 1300 bytes, automatically use TCP transport. Defaults to 0.

Uri Escaped

Boolean, Defaults to 1If disabled, the phone will not escape # characters into "%23" when creating URIs. While this option is enabled, the rule to send numbers when pressing the # key should be disabled.

Click to Talk

Boolean, Defaults to 0If enabled, the phone can make a call by itself receiving an incoming REFER message. Defaults to 0.

MWI Num

StringSets the number to dial for voicemail.

CallPark Num

StringSets the number to dial for call parking.

Retrieve Num

StringSets the number to dial for call retrieval for Broadsoft environments.

MSRPHelp Num

StringFor MS_RP_BU servers, sets a number to be called after a successful transfer.

User Is Phone

Boolean, Defaults to 1If disabled, the phone will not append the ";user=phone" parameter to SIP messages.

Auto Answer

Boolean, Defaults to 0If enabled, and if the NoAnswerTime has elapsed, the phone will automatically answer an incoming call. Defaults to 0.

NoAnswerTime

Integer, in seconds, defaults to 5Sets the amount of time, in seconds, the phone should wait on an incoming call before proceeding to AutoAnswer, if AutoAnswer is enabled. Defaults to 5.

MissedCallLog

Boolean, Defaults to 1If disabled, the phone will not record call logs for this SIP line. Defaults to 1.

SvcCode Mode

Boolean, Defaults to 0If enabled, the phone will allow the sending of service codes (numbers) to the SIP server, depending on the enabling/disabling of certain functions on the phone. Defaults to 0.

DNDOn SvcCode

StringSets the number to send to the server when DND is enabled on the phone.

DNDOff SvcCode

StringSets the number to send to the server when DND is disabled on the phone.

CFUOn SvcCode

StringSets the number to send to the server when Call Forward Unconditional is enabled on the phone.

CFUOff SvcCode

StringSets the number to send to the server when Call Forward Unconditional is disabled on the phone.

CFBOn SvcCode

StringSets the number to send to the server when Call Forward Busy is enabled on the phone.

CFBOff SvcCode

StringSets the number to send to the server when Call Forward Busy is disabled on the phone.

CFNOn SvcCode

StringSets the number to send to the server when Call Forward on No Answer is enabled on the phone.

CFNOff SvcCode

StringSets the number to send to the server when Call Forward on No Answer is disabled on the phone.

ANCOn SvcCode

StringSets the number to send to the server when Anonymous Call Banning is enabled on the phone.

ANCOff SvcCode

StringSets the number to send to the server when Anonymous Call Banning is disabled on the phone.

Send ANOn Code

StringSets the number to send to the server when Anonymous Calling is enabled on the phone.

Send ANOff Code

StringSets the number to send to the server when Anonymous Calling is disabled on the phone.

CW On Code

StringSets the number to send to the server when Call Waiting is enabled on the phone.

CW Off Code

StringSets the number to send to the server when Call Waiting is disabled on the phone.

VoiceCodecMap

Comma-separated list of:

PCMU
PCMA
G726-32
G729
G723
iLBC
AMR
AMR-WB 
opus
G722

Sets the voice codecs used for this line.

VideoCodecMap

H264Sets the video codecs used for this line.

BLFList Uri

StringSpecifies the BLF Resource List to which the phone should subscribe. Multiple lists are supported, separated by commas.

BLF Server

IPv4 address or HostnameIf the server to which the phone is registered does not support BLF Resource List subscription package, sets the address of the BLF Resource List server.

Respond 182

Boolean, Defaults to 0If enabled, the phone will, when it's already on call and an additional call comes in, send a 182 Queued SIP message to the SIP server. If disabled, the phone sends a 180. Defaults to 0.

Enable BLFList

Boolean, Defaults to 0If enabled, the phone will subscribe for BLF Resource List.

Caller Id Type

Integer, 1-5, Defaults to 1

Sets the priority of the incoming Caller ID:

FROM header - 1
P-Asserted-Identity header, followed by FROM header - 2
Remote-Party-ID header, followed by FROM header - 3
P-Asserted-Identity header, followed by Remote-Party-ID header, followed by FROM header - 4
Remote-Party-ID header, followed by P-Asserted-Identity-Header, followed by FROM header - 5

Syn Clock Time

Boolean, Defaults to 0If enabled, the phone will set its clock according to the Date field in the 200 OK following a successful REGISTER. Defaults to 0.

Use VPN

Boolean, Defaults to 1If disabled, and the phone is connected to a VPN, the phone will not initiate REGISTER using the VPN IP address. If enabled, the phone will, when connected to a VPN, use the VPN IP address to initiate the REGISTER. Defaults to 1.

Enable DND

Boolean, Defaults to 0If enabled, the phone will not accept incoming calls from this SIP line. Defaults to 0.

Inactive Hold

Boolean, Defaults to 0If enabled, the phone will send "a=inactive" in the INVITE sent after a call is placed on hold. If disabled, the phone will send "a=sendonly" in the INVITE sent after a call is placed on hold. Defaults to 0.

Req With Port

Boolean, Defaults to 0If disabled do not send port in SIP messages to the server.

Update Reg Expire

Boolean, Defaults to 1If disabled, the phone will not update its registration expiration with the Expires value from the 200 OK that the server sends in response to a successful registration. Defaults to 1.

Enable SCA

Boolean, Defaults to 0Enables support for the Broadsoft SCA feature. Defaults to 0.

Sub CallPark

StringSets the Call Parking subscribed number for Broadsoft servers.

Sub CC Status

Boolean, Defaults to 0If enabled, subscribes to the Broadsoft call center service. Defaults to 0.

Feature Sync

Boolean, Defaults to 0Enables support for Broadsoft Feature Sync. Defaults to 0.

Enable XferBack

Boolean, Defaults to 0If enabled, when a call is transferred from another, and XferBackTime has been reached, the call will be transferred back to the original transferer. Defaults to 0.

XferBack Time

Integer, in seconds, Defaults to 35Sets the amount of time, in seconds, that must elapse before EnableXferBack is processed.

Use Tel Call

Boolean, Defaults to 0If enabled, the phone will replace "sip" in its URIs with "tel"

Enable Preview

Boolean, Defaults to 0If enabled, video preview will be enabled for video received before answer.

Preview Mode

n/aCurrently unused.

TLS Version

Integer, 0-2, Defaults to 0

Sets the type of TLS protocol version to be used:

TLS 1.0 - 0
TLS 1.1 - 1
TLS 1.2 - 2 

CSTA Number

StringSets the number/URI for the uaCSTA server.

Enable ChgPort

Boolean, Defaults to 0If enabled, the phone will attempt to dynamically change its local SIP port in order to work around SIP Router ALG issues. Defaults to 0.

VQ Name

StringSets an identifier for the voice quality server.

VQ Server

IPv4 Address or HostnameSets the IPv4 Address or hostname of the voice quality server.

VQ Server Port

Integer, 1-65535, Defaults to 5060Sets the port used by the voice quality server.

VQ HTTP Server

URLSets the HTTP URL of the voice quality server.
Flash ModeInteger, 0-1, Defaults to 0If set to 0, flash is handled locally on the phone. If set to 1, the phone will send a SIP INFO message indicating the flash event to the server, with data defined by Content_Type and Content_Body
Content TypeStringSets the content type data used when the phone sends SIP INFO flash messages to the server.
Content BodyStringSets the body of the data used when the phone sends SIP INFO flash messages to the server.
Unregister On BootBoolean, Defaults to 0If enabled, the phone will send unregisters to any registered servers after it reboots, before it attempts to register.  Defaults to 0.
Enable MAC HeaderBoolean, Defaults to 0If enabled, the phone will include a MAC parameter, with MAC address as value, in SDP.
Enable Register MACBoolean, Defaults to 0If enabled, the phone will include a MAC parameter, with MAC address as value, in SIP REGISTER packets.
Record StartRecord:onSpecifies the SDP to be passed when recording is started. Currently unused.
Record StopRecord:offSpecifies the SDP to be passed when recording is stopped. Currently unused.
BLF DIalog MatchBoolean, Defaults to 1If disabled, the phone will not strictly check BLF dialog versions.

CALL FEATURE MODULE Elements

...

Expand
Elements
Elements
Code Block
borderStylesolid
titlePHONE FEATURE MODULE Elements
<<VOIP CONFIG FILE>>
 
<PHONE FEATURE MODULE>
Menu Password      :789
KeyLock Password   :123
Fast Keylock Code  :
Enable KeyLock     :0
KeyLock Timeout    :0
KeyLock Status     :0
Emergency Call     :110
Push XML IP        :
SIP Number Plan    :0
LDAP Search        :0
Search Path        :0
Caller Display T   :0
CallLog DisplayType:0
Enable Recv SMS    :1
Enable Call History:1
Line Display Format:$name@$protocol$instance
Enable MWI Tone    :0
--Display Input--  :
LCD Title          :Asterisk
LCD Constrast      :5
Enable Energysaving:4
LCD Luminance Level:12
Backlight Off Time :45
Disable CHN IME    :0
Phone Model        :
Host Name          :bcm911188sv
Default Language   :en
Enable Greetings   :0
--Power LED--      :
Power              :0
MWI Or SMS         :3
In Using           :0
Ring               :2
Hold               :0
Mute               :0
Missed Call        :3
--Voice Volume--   :
Handset Vol        :5
Handset Mic Vol    :3
Headset Vol        :5
Headset Mic Vol    :3
Headset Ring Vol   :5
HandFree Vol       :5
HandFree Mic Vol   :3
HandFree Ring Vol  :5
Ring Type          :Type 2
--DateTime Config--:
Enable SNTP        :1
SNTP Server        :0.digium.pool.ntp.org
Second SNTP Server :1.digium.pool.ntp.org
Time Zone          :-32
Time Zone Name     :UTC-8
SNTP Timeout       :5000
DST Type           :1
DST Location       :3
DST Rule Mode      :0
DST Min Offset     :60
DST Start Mon      :3
DST Start Week     :5
DST Start Wday     :0
DST Start Hour     :2
DST End Mon        :10
DST End Week       :5
DST End Wday       :0
DST End Hour       :2
--DateTime Display--:
Enable TimeDisplay :0
Time Display Style :0
Date Display Style :0
Date Separator     :0
--ScreenSaverSoftkey Config-- :
ScreenSoftkey SaverMode Type  :0 Screen Timeout     :0
EnableSoftKey ActivePeriod:0Exit Period One Start   :0
Period One End Time:0
Period Two Start   :0
Period Two End Time:0
Screen Saver App   :
Sleep After Active :0
Sleep Timeout      :0
--Softkey Config-- :
Style :2
Desktop Softkey    :history;contact;dnd;menu;
Talking Softkey    :hold;xfer;conf;end;
Ringing Softkey    :accept;none;forward;reject;
Alerting Softkey   :end;none;none;none;
XAlerting Softkey  :end;none;none;none;
Conference Softkey :hold;none;split;end;
Waiting Softkey    :hold;xfer;conf;end;
Ending Softkey     :repeat;none;none;end;
DialerPre Softkey  :send;2aB;delete;exit;
DialerCall Softkey :repeat;2aB;delete;exit;
DialerXfer Softkey :repeat;2aB;delete;exit;
DialerCfwd Softkey :repeat;2aB;delete;exit;
Desktop Click      :history;status;none;none;none;
Dailer  Click      :none;none;none;none;none;
Call    Click      :none;none;voldown;volup;none;
Desktop Long Press :status;none;none;none;reset;
Softkey Mode       :0
DialerConf Softkey :contact;clogs;redial;video;cancel;
-- Agent Config--  :
Agent Username     :
Agent Password     :
Agent Number       :
Agent Sipline      :0
Agent Status       :0
Agent Status Reason:
--BW Directory--   :
BWDir1 Title              :
BWDir1 URL                :
BWDir1 Username           :
BWDir1 Password           :
BWDir1 SipLine            :0
--BW Calllogs--    :
BWCLog1 Title              :
BWCLog1 URL                :
BWCLog1 Username           :
BWCLog1 Password           :
BWCLog1 SipLine            :0
--LDAP Config--    :
LDAP1 Title              :
LDAP1 Server             :
LDAP1 port               :389
LDAP1 Base               :
LDAP1 Use SSL            :0
LDAP1 Version            :3
LDAP1 Calling Line       :-1
LDAP1 Bind Line          :-1
LDAP1 In Call Search     :0
LDAP1 Out Call Search    :0
LDAP1 Authenticate       :3
LDAP1 Username           :
LDAP1 Password           :
LDAP1 Tel Attr           :telephoneNumber
LDAP1 Mobile Attr        :mobile
LDAP1 Other Attr         :other
LDAP1 Name Attr          :cn sn ou
LDAP1 Sort Attr          :cn
LDAP1 Displayname        :cn
LDAP1 Number Filter      :(|(telephoneNumber=%)(mobile=%)(other=%))
LDAP1 Name Filter        :(|(cn=%)(sn=%))
LDAP1 Max Hits           :50
--Xml PhoneBook--  :
XML-PBook1 Name               :
XML-PBook1 Addr               :
XML-PBook1 UserName           :
XML-PBook1 PassWd             :
XML-PBook1 Sipline            :-1
XML-PBook1 BindLine           :-1
<<END OF FILE>>

...

Option

Values

Description

Enable TimeDisplay

n/a

Currently unused

Time Display Style

Integer, 0-1, Defaults to 1If set to 0, display time using 24-hour format. If set to 1, display time using 12-hour format. Defaults to 1.

Date Display Style

Integer, 0-13, Defaults to 0

Sets the date display formatting that should be used by the phone as follows:

1 JAN MON - 0
JAN 1 MON - 1
MON 1 JAN - 2
MON JAN 1 - 3
DD MM YY - 4
DD MM YYYY - 5
MM DD YY - 6
MM DD YYYY - 7
YY MM DD - 8
YYYY MM DD - 9
1 January Monday - 10
January 1 Monday - 11
Monday 1 January - 12
Monday January 1 - 13 

Date Separator

Integer, 0-3, Defaults to 0

Sets the date display separator that should be used by the phone as follows:

/, 0
-, 1
., 2
(space character), 3 

...

Softkey Config Element

This section contains child element, ScreenSaver Config, currently unusedelements that control the softkey functions available during various phone states.

Child elements of

...

Softkey Config
Expand
Elements Example
Elements Example
Code Block
borderStylesolid
titleScreenSaver Config softkey Element Examples
<<VOIP CONFIG FILE>>
 
<PHONE FEATURE MODULE>
--ScreenSaverSoftkey Config-- :
ScreenSoftkey SaverMode Type  :0 Screen Timeout     :0
EnableSoftKey ActivePeriod:0Exit Period One Start   :0
Period One End Time:0
Period Two Start   :0
Period Two End Time:0
Screen Saver App   :
Sleep After Active :0
Sleep Timeout      :0
<<END OF FILE>>

Option

Values

Description

Screen Saver Type

n/a

Currently unused

Screen Timeoutn/aCurrently unused
Enable ActivePeriodn/aCurrently unused

Period One Start

n/aCurrently unused

Period One End Time

n/aCurrently unused

Period Two Start

n/aCurrently unused

Period Two End Time

n/aCurrently unused

Screen Saver App

n/aCurrently unused

Sleep After Active

n/aCurrently unused

Sleep Timeout

n/aCurrently unused

Softkey Config Element

This section contains child elements that control the softkey functions available during various phone states.

Child elements of Softkey Config
Expand
Elements ExampleElements Example
Code Block
borderStylesolid
titlesoftkey Element Examples
<<VOIP CONFIG FILE>>
 
<PHONE FEATURE MODULE>
--Softkey Config-- :
Style :2
Desktop Softkey    :history;contact;dnd;menu;
Talking Softkey    :hold;xfer;conf;end;
Ringing Softkey    :accept;none;forward;reject;
Alerting Softkey   :end;none;none;none;
XAlerting Softkey  :end;none;none;none;
Conference Softkey :hold;none;split;end;
Waiting Softkey    :hold;xfer;conf;end;
Ending Softkey     :repeat;none;none;end;
DialerPre Softkey  :send;2aB;delete;exit;
DialerCall Softkey :repeat;2aB;delete;exit;
DialerXfer Softkey :repeat;2aB;delete;exit;
DialerCfwd Softkey :repeat;2aB;delete;exit;
Desktop Click      :history;status;none;none;none;
Dailer  Click      :none;none;none;none;none;
Call    Click      :none;none;voldown;volup;none;
Desktop Long Press :status;none;none;none;reset;
Softkey Mode       :0
DialerConf Softkey :contact;clogs;redial;video;cancel;
<<END OF FILE>>

Option

Values

Description

Softkey ModeInteger, 0-2, Defaults to 1.If set to 0, custom soft keys are disabled. If set to 1, the More softkey is enabled for keys exceeding four. If set etc 2, the Arrow soft key is used for keys exceeding four. Currently hard-coded to 1.
SoftKey Exit StyleInteger, 0-1, Defaults to 1If set to 0, the exiting soft key will be the left-most key. If set to 1, the exiting soft key will be the right-most key.

Desktop Softkey

Defaults to: history;contact;dnd;menu;

Sets the soft key mapping for the idle screen.

Talking Softkey 

Defaults to: hold;xfer;conf;end;

Sets the soft key mapping for the on-call screen.
Ringing SoftkeyDefaults to: accept;none;forward;reject;Sets the soft key mapping for the ringing (incoming call) screen.
Alerting SoftkeyDefaults to: end;none;none;none;Sets the soft key mapping for the alerting screen.
XAlerting SoftkeyDefaults to: end;none;none;none;Sets the soft key mapping for the transfer alerting screen.
Conference SoftkeyDefaults to: hold;none;split;end;Sets the soft key mapping for the conference screen.
Waiting SoftkeyDefaults to: hold;xfer;conf;end;Sets the soft key mapping for the waiting screen.
Ending SoftkeyDefaults to: repeat;none;none;end;Sets the soft key mapping for the ending (far-end has disconnected) screen.
DialerPre SoftkeyDefaults to: delete;none;send;exit;Sets the soft key mapping for the on-hook dialing screen.
DialerXfer SoftkeyDefaults to: delete;xfer;send;exit;Sets the soft key mapping for the transfer screen.
DialerCfwd SoftkeyDefaults to: delete;none;cfwd;exit;Sets the soft key mapping for the call forwarding screen.
Desktop ClickDefaults to: history;status;paccout;naccout;menu;Sets the key mapping for the directional and check keys (up key, down key, left key, right key, check key) for the Idle state.
Dailer ClickDefaults to: pline;nline;none;none;none;Sets the key mapping for the directional and check keys (up key, down key, left key, right key, check key) for the Dialing state.
Call ClickDefaults to: pcall;ncall;voldown;volup;none;Sets the key mapping for the directional and check keys (up key, down key, left key, right key, check key) for the on-call state.
Desktop Long PressDefaults to: status;none;none;mwi;none;Sets the key mapping for the directional and check keys (up key, down key, left key, right key, check key) when they are long-pressed.
Softkey ModeInteger, 0-2, Defaults to 1If set to 0, custom soft keys are disabled. If set to 1, the More softkey is enabled for keys exceeding four. If set etc 2, the Arrow soft key is used for keys exceeding four. Currently hard-coded to 1.
DialerConf SoftkeyDefaults to: contact;clogs;redial;video;cancel;Currently unused.

...

Option

Values

Description

nullnullnull

RPS CONFIG MODULE Elements

...

Code Block
borderStylesolid
titleRPS CONFIG MODULE Elements
<<VOIP CONFIG FILE>>
 
<RPS CONFIG MODULE>
Rps Name           :digium
<<END OF FILE>>

Each element is populated with a value.

RPS CONFIG MODULE Elements

Option

Values

Description

Rps NameString, Defaults to digiumSpecifies the name of the phone when reporting. Defaults to digium.

DIGIUM CONFIG MODULE Elements

...

Expand
Elements
Elements
Code Block
borderStylesolid
titleDSSKEY CONFIG MODULE Elements
<<VOIP CONFIG FILE>>
 
<DSSKEY CONFIG MODULE>
Select DsskeyAction:0
Memory Key to BXfer:3
FuncKey Page Num   :5
DSS Home Page      :0
Expand Board Enable:0
Extern1 Page Belong :0
--Dsskey Config1--:
Fkey1 Type               :2
Fkey1 Value              :SIP1
Fkey1 Title              :
--SoftDss Config-- :
Fkey1 Type               :0
Fkey1 Value              :
Fkey1 Title              :
<<END OF FILE>>

...

Option

Values

Description

Select DsskeyAction

Integer, 0-2

Specifies the action to take on a current call when pressing a DSS key:

Do nothing - 0
Hold call - 1
End call - 2 

Memory Key to BXferBoolean, Defaults to 0If enabled, a blind transfer can be accomplished to a BLF key if proceeded by the transfer hard key.
FuncKey Page NumInteger, 1-5Sets the number of pages of BLF keys to display.
Expand Board EnableBoolean, Defaults to 0Currently unused.
Extern1PageBelongn/aCurrently unused.

...