You've just installed Asterisk and you have read about basic configuration. Now let's quickly get a phone call working so you can get a taste for a simple phone call to Asterisk.
Hello World with Asterisk 1.8/11 and chan_sip
This quick tutorial assumes you have a SIP phone plugged into the same LAN where the Asterisk server is plugged in. It assumes they can both reach each other and are on the same subnet.
Configuration files needed
You should have already run "make samples" if you installed from source, otherwise you may have the sample config files if you installed from packages.
If you have no configuration files in /etc/asterisk/ then grab the sample config files from the source directory by navigating to it and running "make samples".
Files needed for this example:
You can use the defaults for asterisk.conf and modules.conf, we'll only need to modify extensions.conf and sip.conf.
To get started, go ahead and move to the /etc/asterisk/ directory where the files are located.
Backup the sample extensions.conf and create a new one
I'm assuming you use the VI/VIM editor here, after all, it is the best.
We are going to use a very simple dialplan. A dialplan is simply instructions telling Asterisk what to do with a call.
Edit your blank extensions.conf to reflect the following:
Now backup and edit a new blank sip.conf, just like you did with extensions.conf.
Then add the following to your sip.conf file:
Basic configuration will be explained in more detail in other sections of the wiki. For this example to work, just make sure you have everything exactly as written above. For the sake of terminology, it is useful to note that though we have this SIP configuration configured with "type=friend", most people refer to this as configuring a SIP peer.
Configure your SIP phone
You can use any SIP phone you want of course, but for this demonstration we'll use Zoiper, a Softphone which just happens to be easily demonstrable.
You can find the latest version of Zoiper for your platform at their website. You can install it on the same system you are running Asterisk on, or it may make more sense to you if you install on another system on the same LAN (though you might find complication with software firewalls in that case).
Once you have Zoiper installed. Configure a new SIP account in Zoiper.
- Once Zoiper is opened, click the wrench icon to get to settings.
- Click "Add new SIP account"
- Enter 6001 for the account name, click OK
- Enter the IP address of your Asterisk system in the Domain field
- Enter 6001 in the Username field
- Enter your SIP peer's password in the Password field
- Enter whatever you like in Caller ID Name or leave it blank
- Click OK
Your results should look like the above screen shot.
Back at the Linux shell go ahead and start Asterisk.
We'll start Asterisk with a control console (-c) and level 5 verbosity (vvvvv).
Make the call
Go back to the main Zoiper interface, and make sure the account is registered. Select the account from the drop down list and click the Register button next to it. If it says registered, you are good to go. If it doesn't register, then double check your configuration.
Once registered, enter extension 100 and click the Dial button. The call should be made and you should hear the sound file hello-world!
On the Asterisk CLI, you should see something like: