Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Current »

DPMA and the Asterisk CLI

Loading

The DPMA can be loaded into a running Asterisk from the CLI by performing:

module load res_digium_phone.so

Unloading

The DPMA can be unloaded from a running Asterisk from the CLI by performing:

module unload res_digium_phone.so

Reloading

The DPMA's configuration can be reloaded in a running Asterisk from the CLI by performing:

module reload res_digium_phone.so

Reloading

Icon

The DPMA does not store its data in the Asterisk Realtime Architecture (ARA). Therefore, changes made to its configuration file, res_digium_phone.conf, or any files that it might #include, are only loaded into Asterisk when the DPMA is first loaded by Asterisk (on boot, or when module load is performed) or when the module is *reload*ed from the Asterisk CLI

Checking License Status

License status for the DPMA - validation of the license key from /var/lib/asterisk/licenses/DPMA-<keys>.lic - can be check from the Asterisk CLI by performing:

digium_phones license status

If a valid license is found, the Asterisk CLI will return:

OK, Valid product license found

Reconfiguring Phones

Digium phones that have established a session with the DPMA can be ordered to retrieve new configuration information (credentials, contacts, firmware, etc.) from the Asterisk CLI by performing either:

digium_phones reconfigure all

to issue a reconfigure command to all known phones. Or, by performing:

digium_phones reconfigure phone <phone identifier>

to issue a reconfigure command to a specific phone.

If, after running a reconfigure, you receive the message:

Phone '<phone identifier>' will reconfigure shortly.

then your phone has received a reconfigure notice and will reconfigure itself.

If, after running a reconfigure, you receive the message:

Phone '<phone identifier>' has not contacted the server.  The server is unaware of the location of this device and can not reconfigure it at this time.

then there is no active session between the phone and the DPMA. Thus, the DPMA cannot send a reconfigure notification to the phone since the DPMA does not know how to contact the phone.

Show Available Alerts

The DPMA can show all available alerts, as defined by type=alert, by performing:

digium_phones show alerts

Output of this command resembles:

pbx*CLI> digium_phones show alerts
--- Alerts ---
    fancy-alert
    other-alert
---- 2 Alerts found ----

Show Specific Alert

The DPMA can show information about a specific alert, as defined by type=alert, by performing:

digium_phones show <alert identifier>

Output of this command resembles:

malcolm*CLI> digium_phones show alert fancy-alert
Name: fancy-alert
Alert Info: ai-potato
Ring Type: normal
Ring Tone: Office

Show Available Applications

The DPMA can show all available applications, as defined by type=application, by performing:

digium_phones show applications

Output of this command resembles:

pbx*CLI> digium_phones show applications
--- Applications ---
    Queue : 205-sales-queue
    Status : 221-status-dnd
---- 2 Applications found ----

Show Specific Application

The DPMA can show information about a specific application, as defined by type=application, by performing:

digium_phones show application <application identifier>

Output of this command resembles:

pbx*CLI> digium_phones show application 205-sales-queue
205-sales-queue
Queue Application
-----------------
Queue: sales-queue
Member Name: Charles King
Location: SIP/205
Member: yes
Permission: Details
Login Extension:
Logout Extension:

or:

pbx*CLI> digium_phones show application 221-status-dnd
221-status-dnd
Status Application
-------------------
Status: dnd
Send486: Yes

Show Available Firmwares

The DPMA can show all available firmwares, as defined by type=firmware, by performing:

digium_phones show firmwares

Output of this command resembles:

pbx*CLI> digium_phones show firmwares
--- Configured Firmware Options ---
d40-1.1
d40-1.1.1
d70-1.1.1

Show Specific Firmware

The DPMA can show information about a specific firmware, as defined by type=firmware, by performing:

digium_phones show firmware <firmware identifier>

Output of this command resembles:

pbx*CLI> digium_phones show firmware d40-1.1.1
Name: d40-1.1.1
Model: D40
Version: 1_1_1_0_49993
File: 1_1_1_0_49993_D40_firmware.eff

Displaying Lines

The DPMA can report lines mapped to all phones by performing:

digium_phones show lines

where output resembles:

pbx*CLI> digium_phones show lines
--- Lines Mapped to Phones ---
    302  Internal
    303  Internal
    3011  Internal
--- Lines Un-Mapped to Phones ---
---- 3 SIP Lines Found ----

Show Specific Line

The DPMA can show information about a specific line, as defined by type=line, by performing:

digium_phones show line <phone identifier>

where output resembles:

pbx*CLI> digium_phones show line 3011
Name: 3011
Type: Internal Line
Dialable Extension: 3011
Transport: udp
Digitmap:
Line Label: Malcolm 3011
Mailbox: malcolm@default
Voicemail URI:
Re-registration: 300
Registration Retry Interval: 25
Registration Max Retries: 5
First Name:
Last Name:
Location:
Title:

Show Available Networks

The DPMA can show all available networks, as defined by type=network, by performing:

digium_phones show networks

Output of this command resembles:

pbx*CLI> digium_phones show networks
--- Networks ---
    all-networks
    default-network
    network1
---- 3 Networks found ----

Show Specific Network

The DPMA can show information about a specific network, as defined by type=network, by performing:

digium_phones show network <network identifier

Output of this command resembles:

pbx*CLI> digium_phones show network all-networks
Name: all-networks
Alias: All Networks
CIDR: 0.0.0.0/0
Registration Address: pbx.example.com
Registration Port: 5060
File URL Prefix: http://pbx.example.com/firmware/
NTP Server: 0.digium.pool.ntp.org
syslog Server: <Not Set>
syslog Port: <Not Set>
Network VLAN Discovery Mode: <Not Set>
Network VLAN ID: 0
Network VLAN Quality of Service Level: 0
SIP DSCP: -1
RTP DSCP: -1

Displaying Phones

The DPMA can report phones by performing:

digium_phones show phones

where output resembles:

pbx*CLI> digium_phones show phones
---- Digium Phones ----
302
303
3011
----  3 Phones Found    ----

or for a specific phone, and its configuration, by performing:

digium_phones show phone <phone identifier>

where output resembles:

pbx*CLI> digium_phones show phone 230
Name: 230
Group Pin:  <Not Set>
Pin:  <Not Set>
MAC: <none>
Active Ringtone: Digium
Timezone: Australia/Sydney
NTP Resync: 86400
Web UI enabled: Yes
BLF on unused Line keys: Yes
Recording enabled: Yes
Use Local Contact Storage: No
Parking Extension: 700
D40 Logo File: None
D50 Logo File: None
D70 Logo File: None
Login Password: <Set>
Accept Local Calls From: any
Name Format: last_first
Preferences Locked: No
Parking Transfer Type: Blind
ConfigFile: AUTO_GENERATED
Line:  230
Contact: 230.xml
Preferred Firmware: d40-1.1.1
Preferred Firmware: d50-1.1.1
Preferred Firmware: d70-1.1.1
LCD Brightness: 5
LCD Contrast: 5
LCD Backlight Dimming: Off
LCD Backlight Timeout: <timeout disabled>
LCD Backlight Dimming Brightness: 0
Active Locale: en_US
Ringer Volume: 5
Speaker Volume: 5
Handset Volume: 5
Headset Volume: 5
Reset Volume levels between calls: Yes
Headset Answer: No
Application: Queue, 230-sales-queue
Application: Status, 230-status-available

Sessions

Phone sessions, which include useful information like Contact address and MAC, can be displayed by performing:

digium_phones show sessions

where output resembles:

pbx*CLI> digium_phones show sessions
---- Digium Phone Module Active Sessions ----
SessionID:20226687411312545993 SecondsAlive:881     SecondsLastActivity:874     Contact:sip:10.24.19.6:5060;ob       Auth:Yes Inactive:No  MAC:0019159BBA2C
SessionID:7971808731750310104  SecondsAlive:881     SecondsLastActivity:874     Contact:sip:10.24.19.181:5060;ob     Auth:Yes Inactive:No  MAC:0019159BBA9D
SessionID:513313315897094751   SecondsAlive:881     SecondsLastActivity:881     Contact:sip:10.24.19.105:5060;ob     Auth:Yes Inactive:No  MAC:0019159BD025
--- Total active sessions:3 ---

Global Settings

Global settings may be returned by performing:

digium_phones show settings

where output resembles:

pbx*CLI> digium_phones show settings
---- Digium Phone Module Global Settings ----
GlobalPin: <Not Set>
Service Discovery: Enabled
Service Disc. Name: Go 4 Phones
Service Disc. Addr: 10.1.2.3
Service Disc. Port: 5060
Userlist Authentication: disabled
Config Authentication: disabled
File Directory: /etc/asterisk/digium_phones

Version

The DPMA version may be returned by performing:

digium_phones show version

where output resembles:

malcolm*CLI> digium_phones show version
Digium Phone Module for Asterisk Version 1.1.0
malcolm*CLI>
  • No labels