So you'd like to make some secure calls.
These instructions assume that you're running as the root user (sudo su -).
Part 1 (TLS)
Transport Layer Security (TLS) provides encryption for call signaling. It's a practical way to prevent people who aren't Asterisk from knowing who you're calling. Setting up TLS between Asterisk and a SIP client involves creating key files, modifying Asterisk's SIP configuration to enable TLS, creating a SIP peer that's capable of TLS, and modifying the SIP client to connect to Asterisk over TLS.
First, let's make a place for our keys.
Next, use the "ast_tls_cert" script in the "contrib/scripts" Asterisk source directory to make a self-signed certificate authority and an Asterisk certificate.
- The "-C" option is used to define our host - DNS name or our IP address.
- The "-O" option defines our organizational name.
- The "-d" option is the output directory of the keys.
- You'll be asked to enter a pass phrase for /etc/asterisk/keys/ca.key, put in something that you'll remember for later.
- This will create the /etc/asterisk/keys/ca.crt file.
- You'll be asked to enter the pass phrase again, and then the /etc/asterisk/keys/asterisk.key file will be created.
- The /etc/asterisk/keys/asterisk.crt file will be automatically generated.
- You'll be asked to enter the pass phrase a third time, and the /etc/asterisk/keys/asterisk.pem will be created, a combination of the asterisk.key and asterisk.crt files.
Next, we generate a client certificate for our SIP device.
- The "-m client" option tells the script that we want a client certificate, not a server certificate.
- The "-c /etc/asterisk/keys/ca.crt" option specifies which Certificate Authority (ourselves) that we're using.
- The "-k /etc/asterisk/keys/ca.key" provides the key for the above-defined Certificate Authority.
- The "-C" option, since we're defining a client this time, is used to define the hostname or IP address of our SIP phone
- The "-O" option defines our organizational name.
- The "-d" option is the output directory of the keys."
- The "-o" option is the name of the key we're outputting.
- You'll be asked to enter the pass phrase from before to unlock /etc/asterisk/keys/ca.key.
Now, let's check the keys directory to see if all of the files we've built are there. You should have:
Next, copy the malcolm.pem and ca.crt files to the computer running the Blink soft client.
Asterisk chan_pjsip configuration
Now, let's configure Asterisk's PJSIP channel driver to use TLS.
In the pjsip.conf configuration file, you'll need to enable a TLS-capable transport. An example of one would resemble:
Note the protocol, cert_file, priv_key_file, and method options. Here, we're using the TLS protocol, we're specifying the keys that we generated earlier for cert_file and priv_key_file and we're setting the method to TLSv1.
Next, you'll need to configure a TLS-capable endpoint. An example of one would resemble:
Note the media_encryption option for the endpoint. In this case, we've configured an endpoint that will be using SDES encryption for RTP.
You might be tempted to add a transport=transport-tls to the endpoint but in pjproject versions at least as late as 2.4.5, this will cause issues like Connection refused in a few situations. Let pjproject do the transport selection on its own. If you still see issues, set rewrite_contact = yes in the endpoint configuration.
Asterisk chan_sip configuration
Or, if you are using can_sip, you can use the following to assist.
In the sip.conf configuration file, set the following:
Here, we're enabling TLS support.
We're binding it to our local IPv4 wildcard (the port defaults to 5061 for TLS).
We've set the TLS certificate file to the one we created above.
We've set the Certificate Authority to the one we created above.
TLS Ciphers have been set to ALL, since it's the most permissive.
And we've set the TLS client method to TLSv1, since that's the preferred one for RFCs and for most clients.
Next, you'll need to configure a SIP peer within Asterisk to use TLS as a transport type. Here's an example:
Notice the transport option. The Asterisk SIP channel driver supports three types: udp, tcp and tls. Since we're configuring for TLS, we'll set that. It's also possible to list several supported transport types for the peer by separating them with commas.
Configuring a TLS-enabled SIP client to talk to Asterisk
Next, we'll configure Blink.
First, let's add a new account.
Then, we need to modify the Account Preferences, and under the SIP Settings, we need to set the outbound proxy to connect to the TLS port and transport type on our Asterisk server. In this case, there's an Asterisk server running on port 5061 on host 10.24.13.233.
Now, we need to point the TLS account settings to the client certificate (malcolm.pem) that we copied to our computer.
Then, we'll point the TLS server settings to the ca.crt file that we copied to our computer.
Press "close," and you should see Blink having successfully registered to Asterisk.
Depending on your Asterisk CLI logging levels, you should see something like:
Notice that we registered on port 5061, the TLS port.
Now, make a call. You should see a small secure lockbox in your Blink calling window to indicate that the call was made using secure (TLS) signaling:
Problems with server verification
If the host or IP you used for the common name on your cert doesn't match up with your server then you may run into problems when your client is calling Asterisk. Make sure the client is configured to not verify the server against the cert.
When calling from Asterisk to Blink or another client, you might run into an ERROR on the Asterisk CLI similar to this:
This is the opposite scenario, where Asterisk is acting as the client and by default attempting to verify the destination server against the cert.
You can set tlsdontverifyserver=yes in sip.conf to prevent Asterisk from attempting to verify the server.
Part 2 (SRTP)
Now that we've got TLS enabled, our signaling is secure - so no one knows what extensions on the PBX we're dialing. But, our media is still not secure - so someone can snoop our RTP conversations from the wire. Let's fix that.
SRTP support is provided by libsrtp. libsrtp has to be installed on the machine before Asterisk is compiled, otherwise you're going to see something like:
on your Asterisk CLI. If you do see that, install libsrtp (and the development headers), and then reinstall Asterisk (./configure; make; make install).
With that complete, let's first go back into our peer definition in sip.conf. We're going to add a new encryption line, like:
Next, we'll set Blink to use SRTP:
Reload Asterisk's SIP configuration (sip reload), make a call, and voilà:
We're making secure calls with TLS (signaling) and SRTP (media).